Bama Tech Session Saturday April 1. - VTXOA
 
LinkBack Thread Tools
post #1 of 7 (permalink) Old 02-21-2017, 02:21 PM Thread Starter
Senior Member
 
hawkvtx's Avatar
 
Join Date: Aug 2010
Location: Scottsboro, AL
Posts: 1,789
Thumbs up Bama Tech Session Saturday April 1.

After much ( well a little ) deliberation with other members the Bama Tech Session will be held Saturday April 1 at my place in Scottsboro AL. For those of you that have attended in the past you pretty much know the drill. We'll have breakfast at the Western Sizzler in Scottsboro AL at 8am and then get to work. You don't have to be there at 8 but by 9am we'll get started and so depending on what work you may need done then the earlier the better. Keep in mind that stem bearing replacements are about a 2 -3 hour job and if you need your valves checked your bike will need to sit for about 4 hours to allow it time to cool. Any other work that needs to be done such as oil changes and the like don't take too much time and we will be working on Sunday morning until around noon as well.
So if you are planning on coming and need some work done to your bike please post up here and list what type work you'll need done. If your coming just to watch or hang out with us then post up here as well. Everyone is welcome.
I'll have soft drinks and beer on hand and of course if you want to bring an adult beverage with you that's fine but please drink responsibly. We usually will try and break for lunch and either grab some pizzas or go out for BarBQ. However sometime we're so busy the time gets away from us and we work right though lunch, but nevertheless, we will try to make time for it.
If you need work done that requires parts get busy now finding out exactly what you need and get it ordered in time. If you're unsure of what parts you might need then post up and ask. We'll try to make sure that you get the correct items for your job. Also be sure to have any fluids that you may need...oil, fork oil, coolant, brake fluid or whatever. I'll have grease, lithium grease, moly paste and some items like that on hand but be sure to check before hand. Nothing worse than getting elbow deep into something and then finding out we don't have what we need to finish.
If you've never attended in the past then I encourage you to come by and check it out. It's a lot of fun and lots of good guys and gals around working on bikes and just having a good time. And you never know, you might just learn something or even better teach something.
So looking forward to seeing everyone and again, please post up if your coming so I can get a head count.
See you then!



Livin' Blue in a Red state.
hawkvtx is offline  
Sponsored Links
Advertisement
 
post #2 of 7 (permalink) Old 02-25-2017, 11:43 AM Thread Starter
Senior Member
 
hawkvtx's Avatar
 
Join Date: Aug 2010
Location: Scottsboro, AL
Posts: 1,789
Bump for this



Livin' Blue in a Red state.
hawkvtx is offline  
post #3 of 7 (permalink) Old 02-26-2017, 12:32 AM
Senior Member
 
Road Trip's Avatar
 
Join Date: Apr 2013
Location: Near Cullman, Al
Posts: 160
Pam and I are planning on coming up Saturday April 1st. No major work needed.
Road Trip is offline  
 
post #4 of 7 (permalink) Old 02-26-2017, 10:31 AM Thread Starter
Senior Member
 
hawkvtx's Avatar
 
Join Date: Aug 2010
Location: Scottsboro, AL
Posts: 1,789
Looking forward to seeing you guys!



Livin' Blue in a Red state.
hawkvtx is offline  
post #5 of 7 (permalink) Old 03-07-2017, 01:56 PM Thread Starter
Senior Member
 
hawkvtx's Avatar
 
Join Date: Aug 2010
Location: Scottsboro, AL
Posts: 1,789
Just a bump for this. If you're thinking about coming be sure to post up.



Livin' Blue in a Red state.
hawkvtx is offline  
post #6 of 7 (permalink) Old 03-14-2017, 01:41 PM Thread Starter
Senior Member
 
hawkvtx's Avatar
 
Join Date: Aug 2010
Location: Scottsboro, AL
Posts: 1,789
Just another bump for this. So far it doesn't look like we'll have too much to do. A couple of bearing replacements and that's about it. Maybe we'll actually have time to ride a little.
So...this is fast approaching , if you're thinking about coming and need any work done please post up.



Livin' Blue in a Red state.
hawkvtx is offline  
post #7 of 7 (permalink) Old 03-20-2017, 05:37 PM Thread Starter
Senior Member
 
hawkvtx's Avatar
 
Join Date: Aug 2010
Location: Scottsboro, AL
Posts: 1,789
Just another reminder.



Livin' Blue in a Red state.
hawkvtx is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the VTXOA forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome