Aeromach VTX Retro Cruisin' pegs

[SubZero]

Anyone have the Aeromach VTX Retro Cruisin' pegs on there bike? I bought a set for a 100.00 off a guy on the 1800 Classified Board and thought I would check them out, I figure if I don't like them I will just sell them. Just looking to get some feedback.

Here is a picture.

http://www.aeromach.net/shop/hophotos/V ... uisinL.jpg (http://www.aeromach.net/shop/hophotos/VTX_Retro_CruisinL.jpg)

Thanks,
SuBzErO

[Reaper]

I got the custom world mini hwy boards, I love them, if yours work even half as good you will be happy.
I have mine mounted a bit different from the pic, got them to the front a bit, and they are great.

http://www.cruisercustomizing.com/detai ... ct_ID=7600 (http://www.cruisercustomizing.com/detail.cfm?model_ID=43&Category_ID=6&manufacturer_ID=6&product_ID=7600)

http://i24.photobucket.com/albums/c19/VTXreaper/miniboards010.jpg


http://i24.photobucket.com/albums/c19/VTXreaper/miniboards009.jpg


http://i24.photobucket.com/albums/c19/VTXreaper/miniboards010.jpg

[KRUT]

SUBZERO,,,,YEAH,,,I GOT THEM,, and love them 8) easy install and flipup and out of the way when you don't need them,a very good piece of workmanship, and great chroming,really allows me to stretch out my 6'3" bod on long runs,,, :lol: :lol:

[SubZero]

SWEET! Thanks alot for the feedback, I'm going to enjoy these!

SuBzErO

[Pepper007]

I got the custom world mini hwy boards, I love them, if yours work even half as good you will be happy.
I have mine mounted a bit different from the pic, got them to the front a bit, and they are great.

Reaper,

Just ordered a set last night. How do they mount onto the boards? Will I have to make any modifications to the board to get them on? (grinding, drilling)

[Reaper]

I got the custom world mini hwy boards, I love them, if yours work even half as good you will be happy.
I have mine mounted a bit different from the pic, got them to the front a bit, and they are great.

Reaper,

Just ordered a set last night. How do they mount onto the boards? Will I have to make any modifications to the board to get them on? (grinding, drilling)

You have to pull the rubber off the top, position the mini boards, and drill one hole, they can be a bit of a pita to in stall, I got good picks of mine, I can post up when I get home, and my cell number is 262-909-9406 if you want to call me with any qustions.

[Reaper]

I got the custom world mini hwy boards, I love them, if yours work even half as good you will be happy.
I have mine mounted a bit different from the pic, got them to the front a bit, and they are great.

Reaper,

Just ordered a set last night. How do they mount onto the boards? Will I have to make any modifications to the board to get them on? (grinding, drilling)

here is some more pics, and if you can wait, I will be off for ten days at the end of the month, and would drive down, and help you if you need it.There are two bolts on each board. One is drilled through your factory board, and the other is treaded into the clamp tha hooks on your factory board. Hope this helps. give me a call if you need to, I am leaving friday for florida, but I got the cell on, just call no big deal bro.

http://i24.photobucket.com/albums/c19/VTXreaper/miniboards006.jpg

http://i24.photobucket.com/albums/c19/VTXreaper/miniboards005.jpg

http://i24.photobucket.com/albums/c19/VTXreaper/miniboards009.jpg