Anyone dyno in the Upstate?

Does anyone know of or recommend a place that I can get my bike dyno'd? Hopefully some place close to Spartanburg.

Thanks!

[hwyblues]

I know Pineville isn't Spartanbury but I did learn that there's a couple types of Dyno's.
I had mine done at perfromance Honda in Pineville. They have the type that reads from the wheel mounted on the platform that the bike's rear wheel spins to read HP and turque that's all I can do riding a 1300 not being fuel injection.
If yours is fuel injection you can make changes to your bikes computer chip or even change it. All I can do is use the Dyno to fine tune my 1300's fuel and air mixture.

I had mine done one Saturday free. My DJWhPW was 55 and the turque was 230 DJWH TQ at 80 MPH and the red liner kick in at 95 MPH in third gear.

To get it re-jeted agian it's going to cost $75 hour with a tech to run the Dyno get the true reads and then I they get to play with it tell I get the best mixture.

http://bigbikeriders.com/photopost/data/500/5353my_vtx_june_20-thumb.JPG