Voimakas
06-20-2009, 10:26 AM
SOLD
3" Lift kit for a Toyota Tacoma
Fits '95.5-2004 Tacomas.
Stolen from manufacturer's website (http://www.extremetrucktoys.com/tac_v6_lift.htm):
PART # TAC 04 3AD
1995.5 - 2004 TACOMA 4X4 V6 OR 4 CYLINDER
STANDARD CAB, EXTRA CAB, OR DOUBLE CAB.
COMPLETE 3 INCH LIFT KIT
WITH FRONT DIFFERENTIAL DROP KIT
AND PRO COMP ADD-A-LEAFS
NO SPRING COMPRESSOR OR SPECIAL TOOLS REQUIRED
This kit comes complete with the following
A. ( 2 ) 3 inch front lift strut spacers and all required hardware.
B. ( 2 ) PRO COMP add-a-leafs and new centering pins/ bolts.
C. ( 2 ) 1" Front differential drop spacers and required hardware.
D. ( 1 ) Rear brake proportioning valve extension bracket.
Complete step by step installation instruction with pictures.
And our Tech Support Ph # is posted on the home page if you have a question.
The complete kit only takes about 3 1/2 hrs. to install.
In most cases your stock rear shocks will work, But for the best ride
and handling on and off road longer rear shocks are recommended.
As with any lift a front end alignment is required after installation.
Looking for $130 + shipping. Manufacturer's website lists it as ~$190 with shipping.
http://members.uplogon.com/kyle/lift/001.jpg
http://members.uplogon.com/kyle/lift/002.jpg
http://members.uplogon.com/kyle/lift/003.jpg
http://members.uplogon.com/kyle/lift/004.jpg
http://members.uplogon.com/kyle/lift/005.jpg
3" Lift kit for a Toyota Tacoma
Fits '95.5-2004 Tacomas.
Stolen from manufacturer's website (http://www.extremetrucktoys.com/tac_v6_lift.htm):
PART # TAC 04 3AD
1995.5 - 2004 TACOMA 4X4 V6 OR 4 CYLINDER
STANDARD CAB, EXTRA CAB, OR DOUBLE CAB.
COMPLETE 3 INCH LIFT KIT
WITH FRONT DIFFERENTIAL DROP KIT
AND PRO COMP ADD-A-LEAFS
NO SPRING COMPRESSOR OR SPECIAL TOOLS REQUIRED
This kit comes complete with the following
A. ( 2 ) 3 inch front lift strut spacers and all required hardware.
B. ( 2 ) PRO COMP add-a-leafs and new centering pins/ bolts.
C. ( 2 ) 1" Front differential drop spacers and required hardware.
D. ( 1 ) Rear brake proportioning valve extension bracket.
Complete step by step installation instruction with pictures.
And our Tech Support Ph # is posted on the home page if you have a question.
The complete kit only takes about 3 1/2 hrs. to install.
In most cases your stock rear shocks will work, But for the best ride
and handling on and off road longer rear shocks are recommended.
As with any lift a front end alignment is required after installation.
Looking for $130 + shipping. Manufacturer's website lists it as ~$190 with shipping.
http://members.uplogon.com/kyle/lift/001.jpg
http://members.uplogon.com/kyle/lift/002.jpg
http://members.uplogon.com/kyle/lift/003.jpg
http://members.uplogon.com/kyle/lift/004.jpg
http://members.uplogon.com/kyle/lift/005.jpg