Free Tire and shipping when you buy...

[VTXHOGG]

Yes a free Dunny with few to no miles when you buy one of these 1300R wheels from me. You will be getting the wheel in picture. Because these where removed by trike monkey's the condition may vary, small scratches or shallow pits may exsist , I will note any defect I find that can not be removed with steel wool and elbow grease. I have had great success with selling 1300 finals and now have mass quantities of wheels, so it's time to dump them. The price is firm and a real bargain. :thumbup:

#1 has Flange, rotor and free shipping to lower 48 for $150 Sold
http://i334.photobucket.com/albums/m412/VTX110/Wheels/Wheels%208_09/Flange.jpghttp://i334.photobucket.com/albums/m412/VTX110/Wheels/Wheels%208_09/Tred.jpghttp://i334.photobucket.com/albums/m412/VTX110/Wheels/Wheels%208_09/WRot.jpg

Sold
#2 No Flange, or rotor and free shipping to lower 48 for $100
http://i334.photobucket.com/albums/m412/VTX110/Wheels/Wheels%208_09/NoFlg.jpghttp://i334.photobucket.com/albums/m412/VTX110/Wheels/Wheels%208_09/NoRot.jpg

[wmccance]

Hello: I'l like to buy the $100. one shipped. I have PayPal if that works for you. I'm new to the site. Do you need my e-mail address? I'm at 618-288-7193. This will fit the VTX 1300C I'm assuming? Thanks, Doug

[VTXHOGG]

Hello: I'l like to buy the $100. one shipped. I have PayPal if that works for you. I'm new to the site. Do you need my e-mail address? I'm at 618-288-7193. This will fit the VTX 1300C I'm assuming? Thanks, Doug

Hello Doug,

I do have one 1300 C rear wheel if you prefer, the C models are not usually triked, so are rare. The price for the C wheel would be $125 w/o Flange and rotor, $175 W/Flange and rotor. (Price includes shipping to lower 48 ) Either the C or the R will work on your 1300c. C wheel mag pattern is different different than the R, I can take a picture of the actual C wheel you would get if your interested.

[VTXHOGG]

OK I got the 1300C Sold
http://i334.photobucket.com/albums/m412/VTX110/Wheels%208_09/FlangeC.jpg?t=1250467187http://i334.photobucket.com/albums/m412/VTX110/Wheels%208_09/CRot.jpg

[ghost rider]

sent pm

[VTXHOGG]

ghost rider

You have a PM

Thanks, Chris

[Sepiroth]

PM sent

[Mater]

You have both a PM and an e-mail.

[Drtoronto]

any fronts by chance?? i need both a front and rear for my 1300s?
ps will ya ship to Hoser Land :)

[VTXHOGG]

#1 has Flange, rotor and free shipping to lower 48 for $150
Sold


#2 No Flange, or rotor and free shipping to lower 48 for $100 Still for saleSold pending payment

1300C wheel is Sold

Good Day DrToronto
any fronts by chance?? i need both a front and rear for my 1300s? ps will ya ship to Hoser Land
I have a couple front mag rims and plenty of rear wheels I'll try to post a pic this weekend. I've shipped to the great white north don't ya know. But we I would have to quote you a shipping price aaa.

Thanks, Chris :thumbup:

[a14victory]

I will take #2

[scott32]

vtxhogg sent you a pm

[Drtoronto]

#1 has Flange, rotor and free shipping to lower 48 for $150
Sold


#2 No Flange, or rotor and free shipping to lower 48 for $100 Still for saleSold pending payment

1300C wheel is Sold

Good Day DrToronto

I have a couple front mag rims and plenty of rear wheels I'll try to post a pic this weekend. I've shipped to the great white north don't ya know. But we I would have to quote you a shipping price aaa.

Thanks, Chris :thumbup:


Thanxs Chris ya get a quOte to L6M4S9 Just outside Toronto and pm me eh :)
jeff

[VTXHOGG]

Thanxs Chris ya get a quOte to L6M4S9 Just outside Toronto and pm me eh
jeff

I'll start gathering Info tomorrow on shipping but I will not have a quote until Monday. Looks like you will get one of the 2 front wheels, If you don't want it Scott32 expressed interest. I be inspecting the fronts this weekend.


Thanks, Chris

Scott you have a PM, sorry about taking a while to respond. :dontknow:

[rfurton]

If ya got a front 1300C wheel i'd be interested.
How about a rear 1800c?
Thanks Roy

[VTXHOGG]

No "C" no Front, or no 1800 :dontknow::dontknow:

I will be posting more 1300R wheels this week end.
:popcorn:

[bpbdvtx]

I would be interested in #1 and and front 1300R wheel to if you have.

[XRIDERNW]

id be interested in a # 2 please..:thumbup: an R or C wheel would be ok..

[VTXHOGG]

XRIDERNW, and bpbdvtx
you have PM

[curt10]

do you have any more tires for 06 1300r if you do you pm me email kelleys1@windstream.net with pic. thanks

[VTXHOGG]

Yes I do, are you Interested in Rotor and Flange bearing or without?
I was out of commission this weekend so I'm catching up.
The rear wheels that I have on hand are 1300 R wheels, they are off of show room new bikes that are triked. The Trike monkeys have not handled the rear assemblies with the greatest of care or Stored them in the cleanest of places. The 1300 final drive is my primary item that I'm after when receiving the 1300 rear ends. Every item that goes out is checked, cleaned up, scratches are removed and if the surface requires more than that, I send it off to my polisher. This is how I provide Bike ready parts. Let me know if you want a 1300R with or w/o flange bearing and rotor and I will send you a picture of the actual unit you will receive.


Thanks, Chris

[curt10]

yes i am interested in one with rotor and flange bearing can you send me a picture? and how much are they?

[VTXHOGG]

Curt 10 you have PM

DrToranto Shipping Info tomorrow:thumbup:

[VTXHOGG]

PM's
ghost rider, Scott32, DrToranto, Curt10

Thanks, Chris
:thumbup:

[ghost rider]

pm sent

[toetagger]

Interested in #2 for a '05 1300 Retro. Please send pics if you have any left without flange bearing and rotor.

ToeTagger

[VTXHOGG]

Toe tagger

Looks like the pics will go out Sunday

Thanks Chris

[tallbill17]

are you getting these in all the time? I wanting a rear C with flange and rotor soon.. thanks Bill

[VTXHOGG]

are you getting these in all the time? I wanting a rear C with flange and rotor soon.. thanks Bill

Bill
C Models Rarely are Triked, but I do get a C wheel once in a while. 1300 C and R tires are the same but the mag pattern of the rim is different, they are interchangeable.

Thanks, Chris

[XRIDERNW]

vtxhogg i sent ya a pm...:doorag::popcorn:

[readams]

Got them in today. tire and rim looks new. I use about 3 rear tires a year. do you have any more?THANKS

[VTXHOGG]

Got them in today. tire and rim looks new. I use about 3 rear tires a year. do you have any more?THANKS

Thanks allot for the compliment. Yes I do have more 1300R Rear wheels. My biggest limitation in the time I have to preparing them for sale, cleaning and any blems need to be taken care of. I don't send out wheels that need more than a little care to be ready to mount on you scooter.

Here 's two more with Rotors and Flange Bearings $150 Each, Or if you prefer wheels w/o rotors and Flange bearings I'll have a couple of those posted this weekend.
#1

http://i334.photobucket.com/albums/m412/VTX110/Wheels/Wheels%208_09/WRot.jpghttp://i334.photobucket.com/albums/m412/VTX110/Sept1_09/Rear2Set.jpg

And

#2 IS SOLD

http://i334.photobucket.com/albums/m412/VTX110/Wheels%208_09/9509a.jpghttp://i334.photobucket.com/albums/m412/VTX110/Wheels%208_09/9509b.jpg

If anyone needs a 1300r wheel let me know... I've got them and I just need the room, and the price that I'm asking.

[XRIDERNW]

hey there vtxhogg i have sent paypal for a #2 hopes it a nice shiny one to go with my new front wheel....thanks...:mrgreen::thumbup:

[ghost rider]

received mine on Thursday and they look brand new. Going to get them chromed over the winter and go to the darkside ( I hope)

[VTXHOGG]

sold
Wheel with Flange bearing and Rotor $150

http://i334.photobucket.com/albums/m412/VTX110/Wheels/Wheels%208_09/WRot.jpghttp://i334.photobucket.com/albums/m412/VTX110/Sept1_09/Rear2Set.jpg

And Sold

Wheel with OUT Flange bearing and Rotor $100
http://i334.photobucket.com/albums/m412/VTX110/9_09/9509oa.jpghttp://i334.photobucket.com/albums/m412/VTX110/9_09/9509ob.jpg

Free shipping and Rubber
Shipping Lower 48

[XRIDERNW]

:thumbup::mrgreen::thumbup::mrgreen::thumbup: thanks HOGG what a great deal...when you say new, its new :mrgreen::mrgreen::mrgreen:

[VTXHOGG]

thanks HOGG what a great deal...when you say new, its new

Thanks XRIDERNW, I still have around 6 or 7 to sell, so if you know any one that wants a little to no miles 1300R rear wheel, dirt cheep send them my way.
:thumbup:

[XRIDERNW]

got my new rear on today took her out for a test ride and man is it smooooooth its a big change form the spokes to the cast wheels it rides a lot better......thanks again VTXHOGG...what a deal...:thumbup::thumbup::mrgreen:

[live2ride]

Got mine in last week and it too is in like new condition. I'm going to powder coat black to go with my Roadburner exhaust.
Thanks for the deal!

[tattoo7who]

PM sent

[Wilk]

Do you ever get any or do you have a front wheel to match the rear ones


Thanks Dale

[VTXHOGG]

Dale,

Sorry no front wheels at this time but I will contact you as well as other as I get them.

Chris

[tattoo7who]

Thanks for the awesome deal. Both tire and wheel are perfect, I installed it and didn't realize how worn my tire was. Thanks again, hope you come up with a front before I replace my tire.

[impfubat]

They are really very cool, very wonderful
Great work .. really informative .. and thanks a lot for sharing ..
Glad it works as expected for you
looking good

[Bomber]

I'd be interested in two of your cheapest, nastiest rear wheels to use as a start for a trailer that would match my 1800R......

Got any cheap, nasty wheels from your trikemonkeys?:grin:

[VTXHOGG]

Bomber,

I'm down to my last 4. The Trikemonkey crap has been cleaned off so there really not too nasty. Once these are gone it will be months before I put up another batch of wheels. So first come first serve.

1300R rear wheels... Free rubber and Shipping

$100 w/o Flange Bearing and Rotor
$150 w/Flange Bearing and Rotor

Chris

[Tinman]

I'll take one also. If you have a C great if not that is fine. No rotor or flange necessary. Send me the info for payment. I do have Paypal.

[harvey]

I will take one of the ones with Flange and Rotor. Please advise how we do this. Also see PM.

[Knuddy]

Hi,
Sent you an email earlier.

Knuddy

[Knuddy]

I will take one with flange and rotor. Do you take paypal

Thanks,
Knuddy

[VTXHOGG]

wheels sold pending.

Scott32, Harvey, Tinman, and Knuddy you have PM
:thumbup::thumbup:

Thanks, Chris

[scott32]

got it headed your way chris

thanks scott

[VTXHOGG]

Thanks ALL Wheels are sold

SCOTT32, and TINMAN Sending w/o Flange Bearing and rotor

KNUDDY, and HARVEY Sending with Flange Bearing and rotor


Thanks ALL hope to have more Wheels in several months. I will be checking my wish lists before posting.

Ride Safe

Chris

[Bomber]

Put me down for one R wheel without flange. Preferably an 1800R. Gratz.

[06 VTX]

Yes a free Dunny with few to no miles when you buy one of these 1300R wheels from me. You will be getting the wheel in picture. Because these where removed by trike monkey's the condition may vary, small scratches or shallow pits may exsist , I will note any defect I find that can not be removed with steel wool and elbow grease. I have had great success with selling 1300 finals and now have mass quantities of wheels, so it's time to dump them. The price is firm and a real bargain. :thumbup:

#1 has Flange, rotor and free shipping to lower 48 for $150 Sold
http://i334.photobucket.com/albums/m412/VTX110/Wheels/Wheels%208_09/Flange.jpghttp://i334.photobucket.com/albums/m412/VTX110/Wheels/Wheels%208_09/Tred.jpghttp://i334.photobucket.com/albums/m412/VTX110/Wheels/Wheels%208_09/WRot.jpg

Sold
#2 No Flange, or rotor and free shipping to lower 48 for $100
http://i334.photobucket.com/albums/m412/VTX110/Wheels/Wheels%208_09/NoFlg.jpghttp://i334.photobucket.com/albums/m412/VTX110/Wheels/Wheels%208_09/NoRot.jpg






I see you've sold your 1300C mold !! I know there not that many get triked, but would like to see if you would let me know if you get one in !!!

I have an 06 VTX 1800 C 3 ! and hear that the 1300 C, will just bolt up, NO Problem ?? Is this right ?? I hear that this will help the bike out in all kinds of way's !! Not sure of all ? looking at more Info all the time !! HELP !!!!

[VTXHOGG]

I see you've sold your 1300C mold !! I know there not that many get triked, but would like to see if you would let me know if you get one in !!!

I have an 06 VTX 1800 C 3 ! and hear that the 1300 C, will just bolt up, NO Problem ?? Is this right ?? I hear that this will help the bike out in all kinds of way's !! Not sure of all ? looking at more Info all the time !! HELP !!!!

06 VTX,
Sorry sold out of wheels at this time and should delete this post.
A 1300 wheel should not be used on a 1800 to my knowledge if some knows different chime in.:-? Although the Foots mod is a 1800 rear wheel on a 1300 so that you can run a 200 on a 1300, but this requires mod of the 1300 rotor as well.

I can add yo to a list watch for wheel or what ever you want.

Chris:thumbup:

[06 VTX]

06 VTX,
Sorry sold out of wheels at this time and should delete this post.
A 1300 wheel should not be used on a 1800 to my knowledge if some knows different chime in.:-? Although the Foots mod is a 1800 rear wheel on a 1300 so that you can run a 200 on a 1300, but this requires mod of the 1300 rotor as well.

I can add yo to a list watch for wheel or what ever you want.

Chris:thumbup:


No !! I am looking to see if you had, or ever get 1300 final drive ??

[VTXHOGG]

No !! I am looking to see if you had, or ever get 1300 final drive ??

Sorry misunderstood. Yes I have Final Drives and plan to polish about 4 of them.
The Pro-polished will be $375, I do have one that is in great conditions with a stock finish that is ready to go for $275.

PM me if interested, the Polished ones will not be ready for 2 to 3 weeks.

Thanks

Chris

[Rick H]

Do you have any left? . If so I would like one for a 2005 1300R . Thanks Rick H

[Rock Hauler]

I'm looking for a 1800 wheel if you get any in. You can PM me if you get any. Thanks!