View Full Version : BobD's 2005 1800N2
Bought used with V&K pipes, Cobra passenger back rest & bar, Cobra fuel manager, Memphis Shades windshield, Honda MP3 stereo & River Road bags -- 2134 miles.
Added Jardine grips, Fatty Freeway bar, Rivco rear floor boards & Kury Dually Iso pegs first month.
Added WOLO Bad Boy chrome air horn in stock horn position. Made custom bracket from 1/8 aluminum plate. extended stock horn wiring to side cover, mounted relay & 20a fuse under cover. ran 18 ga wire & ground wire back down to horn. All new wires are in wire loom & hidden.
Replaced filter & changed oil Mobil 1 full syn 10w40.
REMOVED 3 oz of oil from 1 gal (4 qts) & poured remainder (3.9 qts) in crank case.
Marked dip stick with full level leaning on side stand.
Added spacers to air filter cover for better breathing "Opee Mod"!
Not in any order: (incomeplete)
(Buff wheels)
(Progressive fork springs)
(Ultimate seats)
(Signal mirrors)
SDC Diamond Star Headlight modulator 3/1/10
SDC Backoff brake modulator 3/1/10
SDC Tri-Star turn signal to brake light converter 3/1/10
(Pin stripping)
(Hard bags)
(Pair Valve mod)
MTC clutch springs 1/28/10 @ 4265 mi
Webslinger custom "Flame" speedo face plate 1/28/10
(Ground fix)
Garage door opener 2/2/10
Driving lights 2/2/10
Added a 6 circuit (relay switched) power distrbution block behind left side cover, mounted (velcro) to the tool box door. Used NAPA fuse block part# 720224. Also added a common ground buss to top of battery cover.
vBulletin® v3.8.4, Copyright ©2000-2010, Jelsoft Enterprises Ltd.