NE master cylinder covers LIST

[cougar]

If you want your states personlized reservior cover...... post on this list :lol: ....cougar


1-1 - cougar
2-1 - danX
3-5 - PsycleFreak
4-1 - nebretro
5-1 - pester
6-1 - LIVEWIRE
7-2 - VTXHOGG
8-2 - Omahabikerguy
9-3-Heavy
10-2-NEBTIGER
11-1-pipewrench :lol:
12-1-vtxraider
13-2-fjvanwet
14-2-Stever

[pipewrench]

put me down for 1 let me know what I need to do thanks

[vtxraider]

1-1 - cougar
2-1 - danX
3-5 - PsycleFreak
4-1 - nebretro
5-1 - pester
6-1 - LIVEWIRE
7-1 - cruzin
8-2 - VTXHOGG
9-2 - Omahabikerguy
10-1-Heavy
11-2-NEBTIGER
12-1-pipewrench
13-1-vtxraider :D


Only have .5 miles on my bike, but put me down for one!

vtxraider

[cougar]

Your on the list..... man...thanks... watch for post on how and when to order.. cougar

[fjvanwet]

Please put me down for 2.
Whatever the final design, these will look great.

[cougar]

thanks fjvanwet watch for post telling how to order them... cougar

[cruzin]

unfortunately i need off the list... with this wonderful weather we had last weekend i went for a ride....came home too late and had a slight run in with bambi's dad... the v is totaled but was insured to the hilt... so when the check comes in hopefully another is on the list

[RobDogg]

unfortunately i need off the list... with this wonderful weather we had last weekend i went for a ride....came home too late and had a slight run in with bambi's dad... the v is totaled but was insured to the hilt... so when the check comes in hopefully another is on the list
I trust that you're ok? That's all that really matters. Let us know if we can help out at all.

Find out what the insurance wants for the wrecked bike, it might be worth buying back (to you or one of us :wink: ) And make sure you get any goodies off that you might have added, they typically don't have salvage value.

[toXic]

Rob - Spoken from experience? Somehow the insurance company will say it was the riders fault not the deers.

[RobDogg]

Rob - Spoken from experience? Somehow the insurance company will say it was the riders fault not the deers.
In the words of the other guys Progressive insurance adjuster, "Well it's at least 40% your fault because you lost control of your bike. "

:roll: :roll: :roll: :roll: :roll:

Isn't insurance grand??!!! Lets just hope that cruzin doesn't have a similar experience 8)

(btw - someone hit me Wed in my Civic, fender bender. just a little damage, but here we go again! :lol: )

[cougar]

cruzin.... Damn dear! I drive to KC every week in my cage for work and you wouldn't believe the dead dear I see on 29.... No problem I will take your name off the list...get better and get another X and we will worry about the Reservior covers than....cougar

[vtxraider]

Procycle in Columbia has overstock 2003 currently. I just bought mine on Monday for $7999. Their Sales Dept sucks, but for that price, I just had to deal with it. My understanding is that they sold 4 2003 VTX1800C's on Monday alone.

If you are looking for a deal, give them a call, just be prepared to deal with some sales crap before you get your bike.

[Heavy]

Put me down One MORE. My buddy wants one.

[cougar]

heavey, you are down for two....thanks Cougar

[LIVEWIRE]

are we ready to order?

[Heavy]

Put me down for one more. Total: 3 covers. Thanks

[cougar]

your down for 3....thanks and keep on selling :lol: cougar

[BONZ]

OK EVERYONE. HERE IS YOUR COVER!

http://www.californiavtxriders.com/forum/album6450.jpg

This is the actual cover and not on aluminum.

I have directed everyone on the others posts to come to THIS ONE, so that the communication between everyone is only one ONE post instead of about 5.

What do you think?

Rhonda

[vtxraider]

That looks awesome! I'm going to have to reconsider my order of one. :shock:

[LIVEWIRE]

LOOKS AWESOME :!: :pepper1:

[toXic]

Nice Work

[PsycleFreak]

Very nice!! I printed off a pic of it and took it to work and now I have another X rider that wants 2. So that is 7 total that I will buy.


Thanx again :D

[Heavy]

This, I think, is one of the best looking covers madethus far. It's cool we can all add a little something, and end up with an AWESOME result.

[VTXHOGG]

:D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D :D
looks great Terry and Rhonda. You really put allot of work and pride into this,

Thanks from the Nebraska VTX Riders.

:D :D :D :D :D :D :D :D :D :D ....

[danX]

Looks Great ... Can't Wait!!

[pipewrench]

It looks great. I can't wait. What do I have to do to get one coming to western Nebraska?

Pipewrench

[BONZ]

It looks great. I can't wait. What do I have to do to get one coming to western Nebraska?

Pipewrench

We are working out the details and will let you know what we decide.
Rhonda

[PsycleFreak]

Just thought I would update my number of covers on the list :D



1-1 - cougar
2-1 - danX
3-7 - PsycleFreak
4-1 - nebretro
5-1 - pester
6-1 - LIVEWIRE
7-2 - VTXHOGG
8-2 - Omahabikerguy
9-3-Heavy
10-2-NEBTIGER
11-1-pipewrench
12-1-vtxraider
13-2-fjvanwet
14-2-Stever

[BONZ]

ORDER FROM THIS POSTING ONLY PLEASE:


You can start sending in your checks now. We will not depost them until we get a total of 15, but keep the checks coming in. The faster they come in, the more we can make at one time.


Check or Money Orders can be mailed to:
Terry Taylor
1412 Village Meadows Drive
Lompoc, CA 93436

Keep posting on this site and we will keep an updated list of who has ordered and how many.
Be sure to include your NAME and HANDLE...this is very imortant.

Any questions, feel free to contact us.

The count we show now is:

1 - cougar
1 - danX
7 - PsycleFreak
1 - nebretro
1 - pester
1 - LIVEWIRE
2 - VTXHOGG
2 -Omahabikerguy
3 -Heavy
2- NEBTIGER
1- pipewrench
1- vtxraider
2- fjvanwet
2- Stever


As you continue to let me know how many you want, I will keep this list edited. Once a cover has been shipped out, I will remove it from the list.

We are Ready to Roll!

Rhonda[

[PsycleFreak]

Are they straight up 35 bucks a piece?? Is there shipping??

Thanx again :D

[BONZ]

Are they straight up 35 bucks a piece?? Is there shipping??

Thanx again :D

Yes, $35.00 each, $70.00 a set.

For those that want to use Paypal, please add an additional $3.35.
Paypal account is: twrl@verizon.net.

Rhonda

[XXXXXXXXXXXXXXXXXXX]

Are they straight up 35 bucks a piece?? Is there shipping??

Thanx again :D

Yes, $35.00 each, $70.00 a set.

For those that want to use Paypal, please add an additional $3.35.
Paypal account is: twrl@verizon.net.

Rhonda

I just Paypal'd you $73.35 for mine. Thanks!

[BONZ]

Are they straight up 35 bucks a piece?? Is there shipping??

Thanx again :D

Yes, $35.00 each, $70.00 a set.

For those that want to use Paypal, please add an additional $3.35.
Paypal account is: twrl@verizon.net.

Rhonda

I just Paypal'd you $73.35 for mine. Thanks!

Just got notification about the payment. As soon as we get payment for a total of 15, they will be made and shipped out. We will let you know when they are shipped. Thank you for the payment.
Rhonda

[danX]

Hi Rhonda and Terry ...

I just sent a Pay Pal payment for one reservoir cover. Thanks

[BONZ]

Hi Rhonda and Terry ...

I just sent a Pay Pal payment for one reservoir cover. Thanks

Payment received, thank you.
Rhonda

[BONZ]

ORDERS AS OF 3/27/05:


The count we show now is:

1 - cougar
1 - danX PAID
7 - PsycleFreak
1 - nebretro
1 - pester
1 - LIVEWIRE
2 - VTXHOGG
2 -Omahabikerguy PAID
3 -Heavy
2- NEBTIGER PAID
1- pipewrench PAID
1- vtxraider
2- fjvanwet
2- Stever


As you continue to let me know how many you want, I will keep this list edited. Once a cover has been shipped out, I will remove it from the list.

We are Ready to Roll!

Rhonda

[pipewrench]

Just sent 38.35 via paypal Iam looking forword to reciecing them thank the pipewrench

[BONZ]

Just sent 38.35 via paypal Iam looking forword to reciecing them thank the pipewrench

Payment received, thank you,
Rhonda

[cougar]

you the $35.00 what is the address to send to...thanks Cougar

[XXXXXXXXXXXXXXXXXXX]

you the $35.00 what is the address to send to...thanks Cougar

Check or Money Orders can be mailed to:
Terry Taylor
1412 Village Meadows Drive
Lompoc, CA 93436

[toXic]

I sent an order to them via PayPal this morning

[cougar]

you the cash for 1 of your covers.. should be in your hands by friday...thanks again for every thing....cougar

[BONZ]

I sent an order to them via PayPal this morning

Received payments. Thank you.
Rhonda

[pester]

Payment has been sent! Thanks!!!

[SLIMPHATBOY]

1-1 - cougar
2-1 - danX
3-5 - PsycleFreak
4-1 - nebretro
5-1 - pester
6-1 - LIVEWIRE
7-2 - VTXHOGG
8-2 - Omahabikerguy
9-3-Heavy
10-2-NEBTIGER
11-1-pipewrench
12-1-vtxraider
13-2-fjvanwet
14-2-Stever
15-1-SLIMPHATBOY

[BONZ]

1-1 - cougar
2-1 - danX
3-5 - PsycleFreak
4-1 - nebretro
5-1 - pester
6-1 - LIVEWIRE
7-2 - VTXHOGG
8-2 - Omahabikerguy
9-3-Heavy
10-2-NEBTIGER
11-1-pipewrench
12-1-vtxraider
13-2-fjvanwet
14-2-Stever
15-1-SLIMPHATBOY
16-1-Cougar

[PsycleFreak]

Money Order has been sent, Thanks again!! (7 covers)

[VTXHOGG]

Money Order has been sent, Tuesday.

[BONZ]

We should be able to ship out the first batch by then end of next week. Thank you all for your quick responses.
Rhonda

[nebretro]

Just sent my payment via paypal. Thanks for the work.
Allen

[LIVEWIRE]

just sent my payment by Paypal for 38.35 thanks.

[vtxraider]

Changed my order to 2 covers! :D

Payment of $73.35 sent by Paypal.

[Heavy]

Sending the check today. 3 covers = $105.00

[BONZ]

Sending the check today. 3 covers = $105.00

Thanks for updating us. Will try to add yours with the first batch.
Rhonda

[vtxraider]

Rhonda,

Did you get my order? I changed it to two covers. I sent it paypal.

[PsycleFreak]

Do the covers come with stainless screws??

[BONZ]

Do the covers come with stainless screws??


Only if you ask. Shall I put you down for s/s for all your covers?
Rhonda

[BONZ]

Rhonda,

Did you get my order? I changed it to two covers. I sent it paypal.

Yes I did and I noticed the change.
Covers are in the process. Will let you all know when they ship out.
Rhonda

[PsycleFreak]

Do the covers come with stainless screws??


Only if you ask. Shall I put you down for s/s for all your covers?
Rhonda

Yes that would be great. Thanks again!!

[vtxraider]

Do we need to send extra for the screws? I would like screws for mine if that wouldn't be too much trouble. Let me know how much extra to send.

[XXXXXXXXXXXXXXXXXXX]

Please put me down for the screws as well. Thanks!

[BONZ]

Do we need to send extra for the screws? I would like screws for mine if that wouldn't be too much trouble. Let me know how much extra to send.

The covers come with chrome screws. They can be changed out with Stainless Steel if you want. No extra charge and they wears better.

Unless someone says different, the chrome will be shipped with the covers.

Rhonda

[BONZ]

Please put me down for the screws as well. Thanks!

Ok. Have added s/s to your order.

Rhonda

[LIVEWIRE]

stainless please.... :D

[BONZ]

HERE IS THE MOST CURRENT LIST THAT I HAVE.
getting close to sending them out, so if anyone else is wanting the stainless steel screws, try posting by this coming Sunday.
Thank you,
Rhonda



1-1 - cougar with s/s screws
1-1- danX
3-7 - PsycleFreak with s/s screws
4-1 - nebretro
5-1 - pester
6-1 - LIVEWIRE with s/s screws
7-2 - VTXHOGG
8-2 - Omahabikerguy with s/s screws
9-3- Heavy
10-2-NEBTIGER
11-2 -pipewrench
12-2- vtxraider
13-2- fjvanwet
14-2- Stever
15-1- SLIMPHATBOY

[nebretro]

SS screws for me also.
Thanks

[danX]

I'll bite ... put me down for the screws, as well. Thanks.

[vtxraider]

I would like SS screws also. Thanks for the great product.

[cougar]

down for the SS screws also....thanks... when should we be getting them??? cougar

[BONZ]

HERE IS THE MOST CURRENT LIST THAT I HAVE.
getting close to sending them out, so if anyone else is wanting the stainless steel screws, try posting by this coming Sunday.
Thank you,
Rhonda



1-1 - cougar with s/s screws
1-1- danX with s/s screws
3-7 - PsycleFreak with s/s screws
4-1 - nebretro with s/s screws
5-1 - pester
6-1 - LIVEWIRE with s/s screws
7-2 - VTXHOGG
8-2 - Omahabikerguy with s/s screws
9-3- Heavy
10-2-NEBTIGER
11-2 -pipewrench
12-2- vtxraider with s/s screws
13-2- fjvanwet
14-2- Stever
15-1- SLIMPHATBOY
16-1- Dan Vorland

I am hoping on either shipping them out on Saturday or Monday at the latest.
Rhonda

[PsycleFreak]

Any word on the covers?? Just wanting to see what the status is.

L8TR

[BONZ]

Any word on the covers?? Just wanting to see what the status is.

L8TR

They are shipping out tomorrow! I will post a list of who's got sent tomorrow for you all.
Rhonda

[pester]

bump

[BONZ]

Well, I sent out a batch of covers Tuesday.

Danny DeLong
John Baclawski
Allen Wood
Paul McIntosh
Dale Vanek
Chris Hogg
William Miskell
Mike Enfield
Andy Baker
Glenn Suhr
Glenn Suhr
Don Burton
Dan Vorland


Be on the look out for them, and enjoy!

Keep those orders coming. :D

Rhonda

[PsycleFreak]

Are they sent out U.S. Postal??

Thanx again!!

[BONZ]

Are they sent out U.S. Postal??

Thanx again!!


Yes, give it 2-3 days min.
Rhonda

[XXXXXXXXXXXXXXXXXXX]

Got mine today. They look great! :shock:

Thanks!

[LIVEWIRE]

DITTO :!:

THANKS.

[pester]

8) :lol: :P

WOW.... they are great!!!

[vtxraider]

:cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry: :cry:

No covers.......

But my 11.5 progressives came today.... :D

But they had scratches and 3 bad chrome blemishes on them.... :x

I haven't had any luck ordering parts.

First, HDL sends me the wrong Cobra pipes...
Then, Motorcycle Pro Shop sends me the wrong seat....
Third, my NC Palading luggage rack doesn't fit my Palading backrest....
Now, HDL sends me beat up shocks....

First problem was completely HDL shipping problem. Shipping invoice correct. Package wrong.

Second problem was completely MPS shipping problem. Shipping invoice correct. Package wrong. Correct package now back ordered. :evil: :evil:

Third problem, NC quality control is working with me. I sent pics, because they can't believe the measurements I am giving them on my parts. :shock:

Fourth problem, not HDL's fault. Bad product from Progressive.

It is hard to stay patient. I want to get the new parts on the bike.

[danX]

Mine came in today, Friday. It looks great! Thanks Terry and Rhonda!
:D :D :D

Thanks, Cougar, for pulling this together and riding herd on it for us!
:D :D :D

[toXic]

Got mine - they are on and looking sharp.

I Vote Omahabikerguy for best AVATAR!

[PsycleFreak]

Man, Lincoln mail must be sloooooooow!! :badabing:



................he does have one mean avatar!! Lets see how long it lasts!! :)

[vtxraider]

Mine didn't come today either.
:cry: :cry: :cry:
I'm in Bellevue with Pester.

[Heavy]

I guess I'm waiting for the second batch :(

[pester]

Hey VTXraider..... we are going to have to meet up for a ride..... what area of are you in? I am over by West High School.

[vtxraider]

I live between Chandler and Cornhusker on 38th Ave.

[vtxraider]

I thought your bike looked familiar. I believe I parked next to it today at work. If your bike is the one I think it is. I was the black VTX1800 without any badges.

[pester]

That is funny.... looked yours over at lunch.... Nice looking ride!

[vtxraider]

Got my covers today in the mail. They look great.

Got the SS screws. Are they 2.5 metric hex? My 3 is too big and the 2 is just too small. Tried to tighten with SAE size, but it was a little off to get tight enough. Have to make a trip to the hardware store tomorrow.

[BONZ]

Got my covers today in the mail. They look great.

Got the SS screws. Are they 2.5 metric hex? My 3 is too big and the 2 is just too small. Tried to tighten with SAE size, but it was a little off to get tight enough. Have to make a trip to the hardware store tomorrow.


The 2.5 metric allen wrench will tighten them up. you do not have to tighten very much. No reason to. The actual thread size is 4 x .7 mm thread. If you have problems, let us know and we can send you another set of screws.

Rhonda

[vtxraider]

No problem, I just wasn't able to get it tight enough with the SAE equivalent. It was a hair too small and I didn't want to strip it. I need to run to the hardware store anyway. :D

Again, great product!

[cougar]

and my cover was waiting to be put on...LOOKS GREAT...thanks Bonz and everyone that worked on this...makes a nice crome addition to the VTX.......NOW Maybe we need Nebrakas VTX patches to go with our covers :lol: what do ya think???? But if we have NE covers and patches than we will want to have a NE vtx club...where will it all stop :shock:

Thanks again everyone....cougar

[PsycleFreak]

Recieved them today and they are badass!! Great idea Cougar. And great design to all those involved. Kudos!!

Thanks Terry and Rhonda, we appreciate it!! :D

[danX]

Got the SS screws. Are they 2.5 metric hex? My 3 is too big and the 2 is just too small. Tried to tighten with SAE size, but it was a little off to get tight enough. Have to make a trip to the hardware store tomorrow.

I have the same problem ... nothing I have will quite fit the SS screws. I tightened both but couldn't get them as tight as the ones I removed, so I replaced one SS screw with the chrome screw that was in the OEM cover, and I left the other SS screw in place (couldn't unscrew it without fear of damaging it, but it still isn't tightened the way I want it). Hopefully, I can tighten both of them up at Tech Day. Still building my tool inventory.

[BONZ]

Got the SS screws. Are they 2.5 metric hex? My 3 is too big and the 2 is just too small. Tried to tighten with SAE size, but it was a little off to get tight enough. Have to make a trip to the hardware store tomorrow.

I have the same problem ... nothing I have will quite fit the SS screws. I tightened both but couldn't get them as tight as the ones I removed, so I replaced one SS screw with the chrome screw that was in the OEM cover, and I left the other SS screw in place (couldn't unscrew it without fear of damaging it, but it still isn't tightened the way I want it). Hopefully, I can tighten both of them up at Tech Day. Still building my tool inventory.

Is it bottoming out on the threads? Is that what you are saying? We haven't had anyone complain about them before. I'm curious to know, please let us know.
BONE

[danX]

Hi Bone ...

I'll speak for my situation. The OEM screw is a standard Philips head screw. The SS screw looks like it is a kind of hex-head screw, but I'm not sure that it is a real hex-head. I pulled the hex tools and the Philips screw driver from my Honda Tool Kit (the OEM kit that comes with the bike), but the hex tools were too large and the Philips screw driver wouldn't quite engage the head of the screw. I just now went out to the garage and tried another option because I remembered that I'd purchased a small Cruz tool kit (like a Swiss Army Knife) and that it had a small hex head tool on it, but but the small hex tool was still too large to engage the screw-head, and the Philips screw driver on the Cruz tool was still too large. I wish I was versed enough in the tools we use to speak more clearly about this ... sorry, I'm still kind of ignorant about this stuff.

[VTXHOGG]

Finally put the covers on and they look great!!! :D

Bonz and Rhonda did a great job and wish sucess it there enterprise with BigLarry

[BONZ]

Covers for the following are being shipped out on Thursdah, 4/21:
Heavy - 3
fjvanwel - 2

I still have three other people on my list that wants them. Please cofirm that you want to b left on the list:

Cougar 1 with SS screws
Stever 2
Cruzin 1

Is that it? Anyone else out there wanting a cover?

We are doing the armed forces also, if you want to go that route instead.

Thank you ALL for the orders. We hope you enjoy them.

Rhnda

[cougar]

have mine Bonz....cougar

[BONZ]

Your'e right. I just never took you off the top of the pending list. Thanx for responding back to me.
Rhonda

[BONZ]

Hi Bone ...

I'll speak for my situation. The OEM screw is a standard Philips head screw. The SS screw looks like it is a kind of hex-head screw, but I'm not sure that it is a real hex-head. I pulled the hex tools and the Philips screw driver from my Honda Tool Kit (the OEM kit that comes with the bike), but the hex tools were too large and the Philips screw driver wouldn't quite engage the head of the screw. I just now went out to the garage and tried another option because I remembered that I'd purchased a small Cruz tool kit (like a Swiss Army Knife) and that it had a small hex head tool on it, but but the small hex tool was still too large to engage the screw-head, and the Philips screw driver on the Cruz tool was still too large. I wish I was versed enough in the tools we use to speak more clearly about this ... sorry, I'm still kind of ignorant about this stuff.

The screw is metric and requires a 2.5 mm allen wrench. If you would rather to have the chrome hex ones I'd be glad to send you a pair. Or the same kind if those are messed uo.

BONE

[danX]

Thanks, Bone ... got it covered. The main problem is my ignorance, but I'm working at getting smarter every day. The cover looks great, and it's now fastened tightly to the reservoir with the SS screws! Thanks again!

[Heavy]

I got it in yesterday. BEAUTIFUL!!!! Great job. :D :D :D :D

[BONZ]

HEAVY

We are glad you are pleased! Show them off for us! :D
Rhonda