storminnorm80
11-23-2005, 09:09 AM
Xenonking HID lowbeam/halogen high beam bulb.
*Cruiser Performance 1.50" Massive Chrome "T" bars, w/ 8" riser. (wires ran internally, what a PIA to do, but looks nice when finished!)
*AeroMach Phat Polished Pistol Grip clutch and brake levers.
*Kury ISO grips
*BBP chrome switch housings.
*Brake-Away Cruise Control.
Barnett steel braided throttle cables.
Motion Pro +4" steel braided clutch cable.
GoodRidge steel braided front brake cable.
Speed-Bleeder valves.
*Kury Chrome front and rear brake reservoir covers.
Progressive fork springs.
Stebel compact air horn.
KewlMetal Risers.
*Barrons Bullet tach.-Replaced w/ Dakota Digital tach.
Chrome front turnsignal bezel covers.
*Radiantz LED amber strips added to front Left & Right frame, wired for running/turn signals.
National Cycle Switchblade System windshield mount.
NC Deflector windshield.
NC 2-up windshield.
BBP Chrome Mesh Radiator grille.
BigBalls VTX1800 tapered steering bearings replacement.
*Clock to instrument panel.- Replaced w/ Formotion clock stick on to R/H mirror.
*Coyote Gas Cap Hinge*
Peaceful Cruisin' Tank bib.
Kury Switchblade front pegs.
*Kury Cruise Peg Mounts.
*Kury small ISO pegs for cruise mounts.
Kury 2" offset peg adapters.
*Kury large ISO passenger pegs. - Replaced w/ Cobra passenger floorboards. (Wifey loves them)
SpeedoHealer.
Chrome petcock lever.
Chrome remote crankcase breather. (I made the mount bracket for it.)
Bub Rinehart staggard exhaust pipes.
DynaJet stage 3 jet kit.
Keine #58 slow pilot jet. (one size larger than stock)
K&N air filter.
*Kury mini-bullet halogen rear turn signals.- Replaced w/ Radiantz LED strips, "Frenched-in" to rear fender.
*Pro-1 diamond LED run/stop light "Frenched-in" to rear fender.
*X-Choppers fiberglass rear fender. (PIA to fit and drill)
Drag Specialties diamond LED run/stop light/ license holder.
Pro-1 diamond LED run/stop light for R/H side.
Mustang 2 piece touring seats.
Progressive 440, 12.5" shocks.
*NC Paladin passenger back rest.
*Radiantz 55 LED Oval brake light added to backrest.
*NC luggage rack added.
*Tool bag on drive shaft cover.
*2 each, Willy&Max BlackChrome Maltese cross backrest bags mounted to sides of backrest like small saddlebags.
* = Replaced after being nailed from behind by a 64 yr old woman wearing dark glasses at 5AM (still dark) driving a 2000 Ford Taurus.
(Please don't let my wife see this list. :lol: )
*Cruiser Performance 1.50" Massive Chrome "T" bars, w/ 8" riser. (wires ran internally, what a PIA to do, but looks nice when finished!)
*AeroMach Phat Polished Pistol Grip clutch and brake levers.
*Kury ISO grips
*BBP chrome switch housings.
*Brake-Away Cruise Control.
Barnett steel braided throttle cables.
Motion Pro +4" steel braided clutch cable.
GoodRidge steel braided front brake cable.
Speed-Bleeder valves.
*Kury Chrome front and rear brake reservoir covers.
Progressive fork springs.
Stebel compact air horn.
KewlMetal Risers.
*Barrons Bullet tach.-Replaced w/ Dakota Digital tach.
Chrome front turnsignal bezel covers.
*Radiantz LED amber strips added to front Left & Right frame, wired for running/turn signals.
National Cycle Switchblade System windshield mount.
NC Deflector windshield.
NC 2-up windshield.
BBP Chrome Mesh Radiator grille.
BigBalls VTX1800 tapered steering bearings replacement.
*Clock to instrument panel.- Replaced w/ Formotion clock stick on to R/H mirror.
*Coyote Gas Cap Hinge*
Peaceful Cruisin' Tank bib.
Kury Switchblade front pegs.
*Kury Cruise Peg Mounts.
*Kury small ISO pegs for cruise mounts.
Kury 2" offset peg adapters.
*Kury large ISO passenger pegs. - Replaced w/ Cobra passenger floorboards. (Wifey loves them)
SpeedoHealer.
Chrome petcock lever.
Chrome remote crankcase breather. (I made the mount bracket for it.)
Bub Rinehart staggard exhaust pipes.
DynaJet stage 3 jet kit.
Keine #58 slow pilot jet. (one size larger than stock)
K&N air filter.
*Kury mini-bullet halogen rear turn signals.- Replaced w/ Radiantz LED strips, "Frenched-in" to rear fender.
*Pro-1 diamond LED run/stop light "Frenched-in" to rear fender.
*X-Choppers fiberglass rear fender. (PIA to fit and drill)
Drag Specialties diamond LED run/stop light/ license holder.
Pro-1 diamond LED run/stop light for R/H side.
Mustang 2 piece touring seats.
Progressive 440, 12.5" shocks.
*NC Paladin passenger back rest.
*Radiantz 55 LED Oval brake light added to backrest.
*NC luggage rack added.
*Tool bag on drive shaft cover.
*2 each, Willy&Max BlackChrome Maltese cross backrest bags mounted to sides of backrest like small saddlebags.
* = Replaced after being nailed from behind by a 64 yr old woman wearing dark glasses at 5AM (still dark) driving a 2000 Ford Taurus.
(Please don't let my wife see this list. :lol: )