Search:

Yes they are well made, it is a solid piece.

I have a used Rivco Solo Rack that I had on my 2006 1300c
PartNumber:RIV-VTXC010
Chrome is excellent, no pits or scratches. Comes with a chrome mounting nut for the fender bolt and a plastic...

+1

New Metzler ME 880's are on the way :D

Gotta love Veterans day sales.

All good answers.

I would change out the steering head bearing anyway with that mileage. Mine is in the shop right now getting the bearing replaced. It had a bad decel wobble and an all around...

I agree with spike, I have a 2009 Ultra Classic and it tracks better in the corners than my VTX 1300.

Thanks for the input, my tires where made on 0307, third week of 2007.

I plan on changing them out to be on the safe side.

I wonder though if they will soften up any with use.

I have a set of Metzler 880's on my 1300, they have about 7,000 miles on them and were put on in June of 2007. Problem is, they have only seen about 700 mile in the last 2 years.

There is still...

For a power outlet I used a "Marine" plug with a cover hardwired to the battery with an inline fuse. I do not recommend overloading the circuit in the headlight housing.

There are othert ways to...

I don't see any reason to hide the info on plates. They are publicly displayed.

I have been a victim of identity theft and fortunately it was caught before a credit card was issued. The company...

Just a couple of Mods. :)

.

There is a lot of good info in the GPS/Electronics forum.

This is what I did http://www.vtxoa.com/forums/viewtopic.php?t=225819

National Cycles "2 Up" on a 1300c, also use a NC "Shorty" when configured for Solo.

I disagree, There have been several MC deaths on Ft Hood (TX). The largest military installation BTW. Even though the average speed is 30-40 mph depending on where you are riding, there is still a...

Samer here, Quick disconnect, even has a key lock for security.

I got mone from a Harley Dealer, bolted it on the left side down by the shifter and foot peg.

Hardwired mine into the battery and ran it up the left side back bone, up the neck and into my tool bag that is mounted in front of the risers. Out of sight. I plug the GPS power cord into the...

I went ahead and got the mount and it works great. You can see it in the right side picture.

Yep.[/quote]


x 2

It's correct. The spring holds the shaft in the holes. Becareful not to loose it when disassembling.

I used a Rivco rack with the Ultimate Seat, also have a backrest.

http://bigbikeriders.com/photopost/data/500/5072rack.jpg

.

That's what I use, works great, increases visibility.

Thats what I did....mcuh more comfortable.

Three hands, at least I did :shock:

Just installed it today. DVD was great, no isssues, works fine. A lot smoother, now I find myelf pulling too hard :)

My wife started riding 2 Up with me a few months ago. I took my solo Ultimate X lowrider off and put the factory "C" seat back on so she could ride. That didnt last long. Ordered her the Ultimate X...