Search:

My first ride demonstrated two problems. First the throttle side is much warmer than the left. If the throttle side was just right the left was too cold. Second is the lack of grip adhesive on the...

Here in AZ we ride year around. I have Gerbing heated glove liners. With gloves over them they are bulky and if I wear the liners alone they only heat the backs of the hands and my fingers still...

I am very interested but my bag open forward which looks like big problem. I have a 2007 1300VTXC with National Cycle Cruiseliner hard bags. The lid opens forward and the hinge is low. The top bar...

I have a fairing and a very tall windshield and still have air flow making noise in my helmet. I could cross my left arm across my chest to stop the noise. I made lowers similar to the thread....

I have a firing and tall windshield and still have air flow making noise in my helmet. I could cross my left arm across my chest to stop the noise. I made lowers similar to the thread below. Now...

My helmet is a Schuberth modular and they claim to be the quietest helmet made. It is very quiet and I installed the stereo speakers inside the helmet for great listening. The Schuberth was better...

I had problems of buffeting from the very start. I found without the 2-up and a full face helmet no buffetting. At that time I had a 3/4 helmet w/ face shield. I found without the face shield was...

Try starting with the gas cap off. The vent tube could be pinched and gas will not flow.

This is a Honda part number 33702-MCV-671 and list for $48.23. This is a used part in good condition price $22.00 shipped and I use PayPal.

75339

This is a Honda part number 33702-MCV-671 and list for $48.23. This is a used part in good condition price $22.00 shipped and I use PayPal.

75213

This spring I was riding back from Prescott on AZ 89A. I was lead dog and there was a van 400 or 500 feet ahead. I was not gaining on it so he was moving pretty fast. I went into a sharp RH turn...

Current price only $65 At this address http://www.ebay.com/itm/ws/eBayISAPI.dll?ViewItem&item=280838065296&ssPageName=ADME:B:WNA:US:1123

Veypor gives you speedo, tach, shift light and gear...

I just figured out how to attach pictures so here are some better ones. The lights are attached by a regular hose clamp and the switch and relay are in the fork cover. Click on the photo to get a...

http://us.mc343.mail.yahoo.com/mc/showMessage?filterBy=&.rand=1718392776&midIndex=0&mid=1_3364572_AIiyo0IAAQI2TQLfPQNFIBTc%2FSs&f=1&fromId=curtis_chadwick%40yahoo.com&m=1_3364572_AIiyo0IAAQI2TQLfPQNFI...

I installed the All Balls and the wobble is gone. http://www.vtxoa.com/forums/images/smilies/icon_cool.gif The wobble I had was if I took my hands off the handle bars and a strange sensation going...

I tried this method of leaving the front wheel together to save work. I found that I could not get enough force on the bearing with the tire and forks absorbing the force. I removed the steering...

I have had the wire slip off the switch at the clutch. If that is the case it will still start in nuetral.

What year is it? After 2007 the factory settings are leaner. What cosmetic changes did you make did you change the air filter? Exhaust?

Has anyone had any experience with this tach? It is $68. http://www.cruisercustomizing.com/detail.cfm?model_ID=64&Category_ID=65&manufacturer_ID=549&product_id=34510&sblid=formselect

I put 2004 1300R floor boards on my 2007 1300C. On the left With the heal and toe shifter there was just barely enough adjustment in the C shift rod. You will have to change the rear brake cylinder...

My 1300C has 1800R handlebars and the 1800R risor. I put 2 inch longer cables and filed the stop for the the brake hose and kept the same hose. The advantage is the 1800R handlebars moves the hand...

If you are talking about the two in front they are over $9 each. I cut a 1/2 inch piece of hose and slipped over the mounting tab. I also used gasket cement to attach all the remaining grommets to...

I bought two other fairings and now I wish I had spent the money for a Woody's fairing. It takes $300-600 to paint everything and it may take many extra hours to prep the other fairings which adds...

I am sorry you had a drop. I have down shifted too many gears many times and skid the rear tire. To me it felt just like I was a kid and skid the rear tire on my bicycle perhaps a thousand times...

I have a Schuberth C2 helmet that is a full face modular and it is very quiet and I could not have heard any radio. Therefore, I bought a Invicta Motorsports fairing for no radio. I installed Scala...