Search:

what a bummer, I hope you post what the problem was found to be.

Make sure the steering lock is tightened, or remove it altogether.

I may be interested as well, is it still available?

Very nice!! What paint did she use? How did she go about it?

I think Kate Upton deserves a mention.

http://i80.photobucket.com/albums/j186/kgimages/KateUpton.jpg

I found them at autozone, i will use them a few times before i chunk them, same on the civic. never had a leak on either

They look great!

A must have for me!! Love it!!!

welcome from Alabama! Lots of good info here!!

This so funny, I experienced the same thing not long ago. We had a huge parade for miles. The two finally pulled off into what I assume was there house. I was aggravated but trying to say to...

Get the largest one! You wont be sorry, it might touch the ground but it makes things Much better!

OK, I want to do this, I saw these pins for the R posted on Bare's site.
http://www.mcmaster.com/#pins/=75ucpv #98404A368
I want to do the front and rear front 2 bolts. I don't mind drilling. ...

Anyone do this with Ultimate Seats? Not a lot of room to play with there.

Hello from Alabama!! Post some pics when you can!!

I was 8 or 9, Mini Bike with Tecumseh engine, belt drive. First ride about 2 or 3 feet then laid it down on right side, the throttle sticks, round and round we go until my dad got it off me. I got...

Thanks for all those pictures!!! Looks like you had a great time!!!

Man thats awful! I saw more on the tube. I used to live there years ago, wishing all you the best!!!

Always the low side, never even thought about it before.........

Thats a beautiful bike!!! Be safe out there!!!

If you are doing the steering head bearing replacement, be sure to check the lock while you have the lower triple tree off. Mine is loose. I did check it and it was tight at that time. The next...

Prayers sent! Wishing you a speedy recovery!!

Looks GREAT!!

Why leave, I like to hear about all biking. Best of luck with your new ride, Ride Safe!!!!

I had a 21" , could not get it where I wanted, so I cut it to 19". Its a Memphis Shades as well. The MS lowers helped me a great deal! I had to adjust both the shield and lowers a few times to get...

Good read, thanks!