Honda VTX Forum banner

Need electrical help troubleshooting Kury RTB Issue

477 views 3 replies 3 participants last post by  Eazy-E 
#1 ·
I installed the Kury RTB adapter a couple of weeks ago and all was working until today. I seem to have lost my brake and signal lights. The running lights seem to come on but no response for pressing the brakes or using the signal lights. I don't get anything from the signals no front no rear and no dash. Where should a look for a broken connection 1st. I think power is ok since I still get running lights. Could it be a broken ground.
 
#3 ·
Found the initial problem... blown fuse. Is there anything I can do in order to check my wiring on the RTB to see what may have caused the fuse to blow or does the RTB have any history of killing fuses. Do I need to switch to a different rated fuse.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top