Honda VTX Forum banner

Rear brake issue

699 views 8 replies 6 participants last post by  cruiser7734 
#1 ·
Is there an adjustment on the rear brake pedal or is my master cylinder shot

The pedal goes all the way down with almost no effect
 
#5 ·
I don't believe that old fluid will cause the pedal to push all the way to the floor with out engaging the rear break. I would first try Bleeding the brakes to see if this resolves the issue. If that doesn't fix it then I would replace the master cylinder and completely flush the system at the same time. I posted another thread the other day explaining that there are definite advantages to completely flushing your break fluid on a 1-2 year basis.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top