F to N Conversion Update

[Mick-S]

Just got done spraying the 2nd coat of clear.
I want to wet sand it and put a couple more coats of clear then sand and buff.

How long does it need to cure before I wet sand it?

Before .........................My Progress
$(KGrHqV,!lkE8Gn!WvI0BPKwM1Rsm!~~60_12.jpg2012-02-25 14.57.380.jpg

[Watercop3]

It looks great. Are you going to do the license plate relocation ?

Watercop

[Mick-S]

It looks great. Are you going to do the license plate relocation ?

Watercop

Are you talking about like this? If so, I will eventually but not right now.
If not I would really like to see what you mean.

1 Kuryakyn 9182.jpg

[Mick-S]

What do you think. It was raining so I couldn't get it out and give the whole thing a bath.
Still waiting on the Rest of the backrest to come in.


Post1.jpgPost2.jpgPost3.jpg

[hdlongrod]

looks good!

[hdlongrod]

looks good!

[Watercop3]

Yes, that is the modification that I was talking about. I used a Radiantz plate frame as it has an LED light built in. Lights up the road behind you so that you can be seen.

Watercop

[TCB]

[Mick-S]

Yes, that is the modification that I was talking about. I used a Radiantz plate frame as it has an LED light built in. Lights up the road behind you so that you can be seen.

Watercop

Do you have a link to the one you used?

[Kalten]

Most use this plate. http://www.radiantz.com/index1.html?10.html&1
If I were to do it again I would use this one. http://www.radiantz.com/index1.html?458.html&1

here is their line up of plate lighting http://www.radiantz.com/index1.html?c17.html&1

[badbode]

Most use this plate. http://www.radiantz.com/index1.html?10.html&1
If I were to do it again I would use this one. http://www.radiantz.com/index1.html?458.html&1

here is their line up of plate lighting http://www.radiantz.com/index1.html?c17.html&1

I would agree... I used the top one... Painted it to match my fender cuz it stuck out like a sore thumb. I "created" the second one by using flex strips on the side of my frame. I would use the second one if I had to do it again.

[Mick-S]

I would agree... I used the top one... Painted it to match my fender cuz it stuck out like a sore thumb. I "created" the second one by using flex strips on the side of my frame. I would use the second one if I had to do it again.

Have you or Kalten got any closeup pics. I'd like to see how it looks.
I had thought about using KURYAKYN 9171
http://www.kuryakyn.com/Products/482/Curved-Laydown

[badbode]

night time



Signal




Let me know if these help.. If not, Im sure I can get you some pics that will.

[Mick-S]

Let me know if these help.. If not, Im sure I can get you some pics that will.

I really like the looks of that. Only problem is that mine is not going to be frenched. At least not anytime soon.

That is the reason I was thinking about something like this with Led lighting.
1 Kuryakyn 9182.jpg

[badbode]

I really like the looks of that. Only problem is that mine is not going to be frenched. At least not anytime soon.

That is the reason I was thinking about something like this with Led lighting.
1 Kuryakyn 9182.jpg

If no French, I would say get the one you posted. Anything is better than the stock mess Honda puts on these things.

[Mick-S]

If no French, I would say get the one you posted. Anything is better than the stock mess Honda puts on these things.

[Mick-S]

It finally quit raining long enough to get it out and clean it up to take a few pics.

What do you think?

[badbode]

I say she looks DAMN nice!! Congrats!