Sure would be nice..
+ Reply to Thread
Results 1 to 12 of 12

Thread: Sure would be nice..

  1. #1
    Senior Member mneccspv's Avatar
    Join Date
    Feb 2009
    Location
    Portland, TN
    Posts
    1,158

    Default Sure would be nice..

    If someone with Roadhouse Dooleys would take the time to take some measurements including angles of bends for those less fortunate and less skilled so we could get some fab'd locally. Diagrams would be awesome with those measurements and angles. Would be very helpful if they even had the original install instructions too.... I do admit that i actually read instructions first.

  2. Remove Advertisements
    VTXOA.com
    Advertisements
     

  3. #2
    Senior Member
    Join Date
    Jul 2010
    Location
    Culpeper, Virginia
    Posts
    135

    Default

    Put me on the list to receive the the above also, been looking for a while for the duallies.

  4. #3
    Senior Member rekless0327's Avatar
    Join Date
    Mar 2012
    Location
    Somersworth NH
    Posts
    163

    Default Me too

    I'd also like those measurements.

  5. #4
    Senior Member mneccspv's Avatar
    Join Date
    Feb 2009
    Location
    Portland, TN
    Posts
    1,158

    Default

    Dang...where's all those "roadhouse Dooley" club members?

  6. #5
    Senior Member cezar142's Avatar
    Join Date
    Aug 2010
    Location
    Bartlett, TN
    Posts
    1,194

    Default

    Hit Mr. VTX up I am sure he would not mind measuring. it.


    Mid South Rider #17 "X" Extreme

  7. #6
    Senior Member mneccspv's Avatar
    Join Date
    Feb 2009
    Location
    Portland, TN
    Posts
    1,158

    Default

    You know. I am about to the point that I would pay someone to pull their pipes and go to a shop to copy them. Anyone around mid-tn area wanta make a few bucks? I'll even shine up your pipes before we put hem back on.

  8. #7
    Member spiderfire's Avatar
    Join Date
    Jun 2008
    Location
    Baldivis- Perth WA.
    Posts
    61

    Default Sure would nice

    Hey Guys, take a look at reply to thread---12/25/2010--Howler-- roadhouse dooley exhaust; seems there may have been problems, I COULD BE WRONG.

  9. #8
    Senior Member mneccspv's Avatar
    Join Date
    Feb 2009
    Location
    Portland, TN
    Posts
    1,158

    Default

    If you are talking about this thread:
    http://www.vtxoa.com/forums/showthre...dooley-exhaust

    i am pretty sure he resolved that issue and my guess is it was a fuel management issue, not pipes.

    i have resigned to the fact that I will not be getting my hands on a set of Dooleys, which is okay since they were slightly flawed in design, but if I can get all the measurements or a chance to copy a set from hearder, crossover and all the way to muffler, I could easily get my hands on some mufflers.

    I would even be willing to make sets for others once I got it all sorted out. Surely someone could win some good karma points by helping out on this...(gotta try every angle)

    Now I am sure my comment about the system being flawed hurt someone's feelings since they have been feeling special since they got their pipes so let me explain. Surely anyone that found the need to weld a restricter (washer) inside the crossover, will agree the system did not arrive with out a design flaw.

    Cmon folks, someone help a brotha out....

  10. #9
    Member spiderfire's Avatar
    Join Date
    Jun 2008
    Location
    Baldivis- Perth WA.
    Posts
    61

    Default sure be nice

    Hey mneccspv, dont know if this helps.[PDF]exhaust - Parts to Go

    www.partstogo.com.br/catalogo3/09PUSTREET_Part5.pdf try this, page 85 dooley exhaust systems, cantry to measure from photos

  11. #10
    Senior Member mneccspv's Avatar
    Join Date
    Feb 2009
    Location
    Portland, TN
    Posts
    1,158

    Default

    So cruel. I've seen plenty of pics. Need dimensions

  12. #11
    Member spiderfire's Avatar
    Join Date
    Jun 2008
    Location
    Baldivis- Perth WA.
    Posts
    61

    Default sure be nice

    Sorry Mate, But will keep eyes open for u.

  13. #12
    Senior Member dirtstiff's X's Avatar
    Join Date
    Aug 2007
    Location
    NW Orygone
    Posts
    1,281

    Default

    Documents - designs with Roadhouse' name on it might be patented or proprietary information.
    I have an email address for one of the X owners of RH, sometimes he answers email questions??
    Maybe he will send you the full Monty?

    PM me and I will give you Brandon's email. No guarantee..

    J
    Last edited by dirtstiff's X; 01-09-2013 at 10:06 PM.
    2005 VTX1800R Spec 2 Titanium Pearl
    2013 F6B Deluxe - Black - http://hondaf6b.com/album.php?albumid=106
    RIP JDJ / You will be missed brother, but never forgotten

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.
If you do not want to register, fill this field only and the name will be used as user name for your post.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.


Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •