|
|
|||||||
| VTX 1800 Tech Board Tips, Tricks, Mods, Maintenance and VTX 1800 questions go on this board. Jump on in and post "Tech" related messages here. |
 |
|
|
Thread Tools | Display Modes |
07-30-2010
|
#1 |
|
Junior Member
Join Date: Jul 2010
Location: King George, VA
Posts: 11
|
New Kuryakyn Air Filter Kit.
A few weeks back I inquired about an eldebrock filter I had seen on another bike. I found the guy that made them but he was all sold out.
I found a new item at J&P cycles called the Velociraptor made by Kuryakyn for $170. I ordered it and just got through installing it on my 2008 1800T. It looks great! I will ride early tomorrow and report. I am including some pictures of the kit and a few at different stages of install. It took me about two hours. Big Will |
|
|
|
07-31-2010
|
#2 |
|
Senior Member
Join Date: Aug 2004
Location: Seattle/Everett (AZ in my heart)
Posts: 12,480
|
Looks good but looks like it sticks out further than a Hypercharger
__________________
Why is common sense not so common Why doesn't P.E.T.A. ever attack a biker
|
|
|
|
|
07-31-2010
|
#3 |
|
Senior Member
Join Date: Apr 2010
Location: hancock county,Ohio
Posts: 289
|
I love the looks report in after you ride it a few 100 miles and let us know if it is in the way of your leg. I started a post about these not long ago and have been waiting on a pic like the ones you have taken looks good.
Keep us posted
__________________
Live Free, Ride Free, Or die Fighting for the Right to do so! |
|
|
|
|
07-31-2010
|
#4 |
|
Member
Join Date: Apr 2004
Location: SE Ohio
Posts: 64
 |
i like those too, was thinking of selling my hypercharger and installing this one. keep us posted!
__________________
06' VTX 1800 N3 Resq's Roads People are all allike in their promises. It is only in their deeds that they differ. |
|
|
|
|
07-31-2010
|
#5 | |
|
Senior Member
Join Date: Jun 2009
Location: Garland, TX
Posts: 493
|
Quote:
Is this the one you are talking about?? Not my bike. Just found it on the site but I do have the same one but have yet to install it. Actually I did install it for about 20min and then went back to the stock intake since it was popping like crazy......Sorry for the hijack! I actually like the Kury one you have now. Please do let us know if it sticks out a lot..... 
__________________
George  2006 1800R3Silver/Black Progressive springs and 440HD rear, L&R forwards, VTXexhaust.com pipes, MS Batwing, Ultimate Big Boy 3 piece |
|
|
|
|
07-31-2010
|
#6 |
|
Junior Member
Join Date: Jul 2010
Location: King George, VA
Posts: 11
|
It does stick out a ways but it is not in the way of my leg on the floorboards...I don't have highway bar/pegs yet so I don't know if it would be in the way with those. I tried to invison it and I think it would be OK.
I ran a tank of gas through today and here's my first impression: I makes a lot of noise. At lower RPMs, when accelerating normally, it is kind of an irritating sort of growling noise but with a full twist it is a satisfying induction noise that is actually louder than my stock pipes. I did not add a fuel control module (may need one). I pulled the two 30A fuses for a couple minutes to reset the fuel injection and went with that. It started fine every time and there is a modest boost in acceleration. Overall I like it. I'll report again in a few weeks after I ride with a group. I'll also provide any comments from other folks that may pipe up. Several have already commented that is looks good on the bike. |
|
|
|
|
07-31-2010
|
#7 |
|
Junior Member
Join Date: Jul 2010
Location: King George, VA
Posts: 11
|
The picture that GOG provided is the one I originally inquired about except the one I saw had an Eldebrock LOGO on it.
Big Will |
|
|
|
|
08-02-2010
|
#8 |
|
Junior Member
Join Date: Jul 2010
Location: King George, VA
Posts: 11
|
Since several folks asked about how far the air cleaner stuck out, i thought I would add a few more pics to give a better perspective.
Big Will |
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
