VTXOA - View Single Post - USB charging issue - AKA Gremlin Chasing
View Single Post
post #2 of (permalink) Old 11-16-2017, 08:10 PM
Hans&Feet
Senior Member
 
Hans&Feet's Avatar
 
Join Date: Jun 2005
Location: Conyers/McDonough, GA
Posts: 9,948
Garage
5 volts normal, 4.94 volts is the only good one if testing from Pin 1 to Pin 4

But what are you comparing it to?
Pin 1 +5 volts
Pin 2 Data -
Pin 3 Data +
Pin 4 Ground

https://upload.wikimedia.org/wikiped...px-USB.svg.png

Vibration in the connector may have worn down the conductor.
I just put a small amount of Dielectric grease on my micro USB plug.

2005 1300c Red, Mustang seat, HK 2.5 straights. Leds for safety-front & back. 190,260 VTX miles

Last edited by Hans&Feet; 11-16-2017 at 08:18 PM.
Hans&Feet is offline  
 
 
For the best viewing experience please update your browser to Google Chrome