VTXOA - View Single Post - Batwing Amp Wiring
View Single Post
post #13 of (permalink) Old 02-19-2019, 10:25 AM
prkuehn
Senior Member
 
prkuehn's Avatar
 
Join Date: Aug 2008
Location: Lowell, Arkansas
Posts: 2,465
Batwing Amp Wiring

The user manual for the amp addresses the speaker ohm relative to bridged usage. It specifies to use either 4 or 8 ohm speakers for bridged.



The troubleshooting also references how to remedy an issue if the overload protection is triggered.



Without a doubt, running the output in 4 or 8 ohm will reduce the chance of amp failure. The screenshots were taken from the NGMD60.4 manual.

How was it wired from Tsukayu when you received it? Reach out to their technical support for confirmation of the setup.


2007 1300C with Woody's Fairing, HD King Tour Pack, and Cavalry Hard Bags.

Last edited by prkuehn; 02-19-2019 at 10:31 AM.
prkuehn is offline  
 
 
For the best viewing experience please update your browser to Google Chrome