VTXOA - View Single Post - Hi everyone I’m new here
View Single Post
post #7 of (permalink) Old 08-03-2019, 10:36 PM Thread Starter
Junior Member
Join Date: Aug 2019
Posts: 12
Originally Posted by Blaine C View Post
Risers & bars are all in one on the "C" ...You will need a aftermarket set of risers..Or ones of a f/s model....If you get aftermarket you will need to enlarge the holes in the triple tree...They are 12mm....aftermarket risers are 1/2"....Only takes a couple of min to do.
The bike came with aftermarket handlebars and risers but I got a set of 12” apes that are a bit narrow on the bottom side where the risers are attached to so I order a plate that will allow me to reposition the risers closer to each other to be able to use the apes I’ve got
Calivtxnob is offline  
For the best viewing experience please update your browser to Google Chrome