VTXOA - View Single Post - Reversing Dyna Jet Install
View Single Post
post #1 of (permalink) Old 08-19-2019, 01:59 AM Thread Starter
Cuthbert J Twillie
Senior Member
 
Cuthbert J Twillie's Avatar
 
Join Date: Jan 2017
Location: Minnesota. But don't tell the cops.
Posts: 291
Reversing Dyna Jet Install

When I bought my X the previous owner had a custom air box and re-jetted the carb. I wanted it all stock so I made the necessary needle change etc. I just learned that part of that Dyna install is drilling a hole in the slide. I've read some kits require it some don't. What does the OEM, untouched slide look like. Is there already a hole in it so the Dyna hole would make two? Or is it solid and a single hole would indicate a drilled hole? If there is a drilled hole I have to suspect there would be a performance issue of some kind going back to the OEM needle. And then there's the fix if it has been drilled. I suspect a new expensive slide. Next time I have the tank off, I'll have to open the top and see if there's damage. Thanks!

My 2004 1300C


Cuthbert J Twillie is offline  
 
 
For the best viewing experience please update your browser to Google Chrome