VTXOA - View Single Post - carb and injector cleaning
View Single Post
post #5 of (permalink) Old 09-18-2019, 09:27 AM
Senior Member
RScottie's Avatar
Join Date: Jul 2017
Location: NE Kentucky, United States
Posts: 192
When I purchased my 2004 VTX1300c, it had been sitting for a few years. The owner stated that it had been started every month or so and he had used Sta-bil in the gas.

It did run a little rough at first.

I put Seafoam in it at a hair over the 1 oz to a gallon ratio. (The label says a little more will not hurt anything.)

I ran Seafoam for the first 4-5 tanks of fuel I put through it. I even used the reserve setting so that those holes would be cleaned too.

It runs great and I never had to mess with the carburetor.

2004 VTX1300C
RScottie is offline  
For the best viewing experience please update your browser to Google Chrome