VTXOA

VTXOA (https://www.vtxoa.com/forums/)
-   General MC Message Board (https://www.vtxoa.com/forums/5-general-mc-message-board/)
-   -   Name That Part (https://www.vtxoa.com/forums/5-general-mc-message-board/234418-name-part.html)

argyle64 04-10-2010 12:13 AM

Name That Part
 
Who manufactures the chrome accents on the tips of the front and rear fender and the three little chrome slits on each fender on this bike?

[img]http://bigbikeriders.com/photopost/d...18090207-g.jpg[/img]

dosxxs 04-10-2010 12:23 AM

National Cycle for the fender tips. Kuryakan for the 3 little crome strips.

lv2cruz 04-10-2010 12:27 AM

Quote:

Originally Posted by argyle64 (Post 2759808)
Who manufactures the chrome accents on the tips of the front and rear fender and the three little chrome slits on each fender on this bike?

[img]http://bigbikeriders.com/photopost/d...18090207-g.jpg[/img]

Not certain, but I would guess Kuryakin on the slits. Either Kuryakin or National Cycle on the fender tips. :dontknow:

stayung 04-10-2010 01:18 AM

Thanx for that info. I too have been eyeing the 3 strip thingy's on here and wondered who made them. May need the fender tips too as my rear has some small chips at the tip.

Big Jon 04-10-2010 12:22 PM

You can save yourself a lot of money and make the chrome inserts for the fenders yourself. I used chrome tape. Cut out a template, Use the template to cut out the strips, clean the fender well with rubbing alcohol and stick on. Been on for 5-6 years and still look great.

KeyWasted 04-10-2010 03:56 PM

Quote:

Originally Posted by Big Jon (Post 2760342)
You can save yourself a lot of money and make the chrome inserts for the fenders yourself. I used chrome tape. Cut out a template, Use the template to cut out the strips, clean the fender well with rubbing alcohol and stick on. Been on for 5-6 years and still look great.

:agree:

Chrome peel and stick trim works well and costs much less. BTW, the bike in the pic looks pretty goofy with the passenger backrest and no pass. seat.:joke:

Mulla 04-10-2010 04:06 PM

The answer is..........
 
it is called "Bling".:mrgreen: Sorry couldn't resist! :D

haveme1 04-10-2010 04:58 PM

You can buy em from any Honda shop or after market bike site.

DrReid 04-12-2010 07:56 AM

Quote:

Originally Posted by stayung (Post 2759906)
Thanx for that info. I too have been eyeing the 3 strip thingy's on here and wondered who made them. May need the fender tips too as my rear has some small chips at the tip.

Not long ago I installed the Kury chrome fender louver inserts (front and rear fenders). Previously, I had stickers from someone who made them. They were OK, but up close they looked cheesy and I wanted something 3-D and the Kurys fit the bill, even though the bill was a bit $teep. They look terrific. If you go with these, dry fit them to check for fit: they come pre-bent to match the fender curve, but I found I needed to bend some of them ever so slightly to match the fender curve perfectly. After that, sticking them on was no problem.

$0.02,

MortXX 04-12-2010 06:21 PM

The accessories page on Honda's web site generally has the "bling" listed. You may have to try different years, though the parts are the same number.


All times are GMT -4. The time now is 05:50 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome