Drill the kickstand maybe 1/2" back from the tip that contacts the ground. Use a small bit to start, then work up to either 1/4" or 5/16" x 2" bolt, a bit of Loctite, and a slotted stainless castle nut to dress it a little bit. Thats what I did. Sticks out enough that your heel can catch it easily. The bolt head through the KS only sets the bike up a little more to vertical. A.K.A. the kickstand mod.
2003 1800C Black w/ H-K 3", PC III, Clearview w/s, Hondaline backrest, XM sat. radio, MB 12" shocks, Prog. fr. spgs., Wolo, SPyKER mod, Glen's gas cap, Paladins, Drag Specialties Popsicle pegs, K-N, blackened engine, Kury RTB, mirrors & r. boards, blue LED's, Rivco tach & risers, LeatherLyke bags, backrest bag, w/s tri-pouch, Gen. Altimax RT43, Mich. Cmdr. II, Ult. Lowrider, Showchrome grips. 12-18 VTXCafe Bike of the Month