Honda VTX Forum banner

handlebars

  1. 1800C Handlebar upgrade

    VTX 1800 Tech Board
    I want to get Tbars for my 1800c but I only found one mount for the speedometer that will fit. They only work for their Tbars so I ordered them. Im really disappointing because they only changed the pull back by 1" and I spent $360 for pretty much the stock setup but with Tbars. I see a lot of...
  2. New Handlebars - VTX1300c

    VTX 1300 Riders Board
    Just purchased a 2004 VTX 1300c. I am wanting to put some 10" Z Bars on it similar to what is seen here here. I know you have to go with longer cables and such for much taller bars, I was wondering if anyone had bars similar to those I linked above and could tell me. I don't really want to...
  3. '02 VTX 1800R risers

    VTX 1800 Tech Board
    I would like to get pull back risers. What height can I go without changing lines and cables? Thanks!
  4. 15 inch pullback drag bars for the C

    VTX 1300 Riders Board
    If you have a C and like the drag bars but not the reach, check out my exchange with Phat Performance Parts. My only question now is how long the replacement cables and brake hose need to be. FYI, the link is to Parts Unlimited. "This is what the manufacturer specs. I'm pretty sure it's...
  5. FOR SALE - R/S 1" Bars

    1800 Classifieds-For Sale Only
    FOR SALE - R/S 1" Bars ***SOLD*** ***SOLD*** 2003 1800 R/S 1" Bars...clean and straight for $90 plus shipping... Thanks for looking....
  6. Need Help! (Miami Area)

    VTX 1300 Riders Board
    Does anyone know a motorcycle shop where I can just take my bike and have them install whatever I want? To be honest, I'm not so good with my hands and I can install some little stuff like Kuryakyn add ons, etc. But when it comes to more difficult things, like Wheels, Lights, or handlebars...
  7. tons of parts for sale

    1300 Classifieds-For Sale Only
    Stock exhaust complete-road rash on lower muffler $50+shipping Exhaust includes tips and adapters for straight pipe mod- "WARNING LOUD" Cruiser Performance 1.25 inch VTX Fatty T-Bars with 9 Inch Rise - Black $100+shipping All Reasonable offers will be accepted!!!!!!!!!! Can send pics through...
  8. Cable Lengths for Apes - Stainless Steel Cable Questions

    VTX 1300 Riders Board
    Hey guys, getting ready to install a set of Ape Hangers on my 2006 VTX1300S. I bought the 1.5" Big Buffalo's from Drag Specialties. The bars are the 16" version. I am running 1.5" Big Buffalo Risers also from Drag. I will be ready to mount them as soon as my triple trees are back from chrome...
  9. 1800C Parts for sale

    1800 Classifieds-For Sale Only
    1800C Stock shocks $60.00 plus shipping. Good shape, just replaced with progressive 412's. 1800C Stock handlebars $25.00 plus shipping. 1800C Front stock Brakes lines $20.00 plus shipping. 1800C Push Pull cables stock 15.00 plus shipping for both. 1800C Hondaline Deluxe tall sissy bar and pad...
  10. Apes and cables for an 04 C

    Wanted or WTB VTX Classifieds
    Im looking for a set of 16 in apes and appopriate cables for my 04 1300c. I'd even be interested in longer cables if anybody has any they no longer need as long as they will accomadate the taller bars. I'd also be interested if anybody has any other ideas as my stocks are just too short for me...
  11. parts for C to R on way

    VTX 1300 Riders Board
    After much debate about getting kewl 195 risers or scootworks I finally decided to just do it right the first time and ordered R handlebars. Aeromach 4" risers, R break hose, clutch, and throttle cables on the way. I was going to get the Chromite II clutch cable but decided for the same price I...
  12. Want Advice on Internal Wiring of Handlebars

    VTX 1300 Riders Board
    I'm planning on running the wires inside my Super Radius Handlebars this winter. I have a shop manual with the wiring diagram. Can anyone give me the benifit of their experience doing this? I couldn't find anything on the How To, Step by Step Board. Any information like: What gauge wire did...
  13. A Tale of 3 Bars and 2 Risers

    VTX 1300 Riders Board
    Well, not really a tale. For that see http://www.vtxoa.com/forums/showthread.php?t=240668 Anyway, to the best that I could, I took some pics of the various bars and risers I had on hand. I tried to keep the bike and camera in the same position each time. Also the 0 inch vertical (ie the right...
  14. Super Radius Bar Installed

    VTX 1300 Riders Board
    I was one of the guys waiting for over a month for Punisher bars. Others were changing their orders to the Parts Unlimited Super Radius Bar. It's bascially the same but has 15" pullback and costs a little more. I changed my order and they were delivered in seven days along with the Kury Chrome...
  15. handlebar help-- spacing

    VTX 1300 Riders Board
    Can any of you guys out there tell me the bolt spacing for the 1300c?--id like to get some new bars but it seems i keep running into bars that are only listed by specs of spacing. I been looking at maybe a set of chubbys..lol yea, i just like sayin the word..lol thanks again!
  16. Speedo Mount

    VTX 1800 Tech Board
    I was wondering if anyone had any experience with these bars http://www.xtremerevolution.com/store/showproduct.aspx?siteid=1&productid=12276&CategoryID=19&SectionID=0. Would the baron's mount for the xtreme bar work with these or any suggestions on how I can mount my stock speedo. Thanks
  17. Help with new VTX1300S - windshied - handlebars -BUBS

    VTX 1300 Riders Board
    Hey all, Wisconsinite had a great warm day with no snow or rain so I brought home my new 06 VTX1300S. First thing. I got a 17" Memphis Shade windshield with quick release. It's to short and I'm trying to send it back and get the 19" or something higher. So my first question is there...
  18. Help with 1.25" handlebars.

    VTX 1800 Tech Board
    Ok. Bike got trashed by a cager, no, I wasnt on it..... and I am replacing my pratically new apes. I was looking at these. My question is threefold. 1) I realize the ends are tapered for the grips, but do the stock Controls mount to bars that are this thick w/o modification or is it tapered for...
Top