Honda VTX Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. VTX 1300 Riders Board
    Late last year I got rid of the stock air filter and put on a K&N RA-071V filter. I have noticed that it feels starved for fuel. I run the choke about half way all the time pretty much cold or hot engine, warm or cool weather. I've used the idle mix as much as I can. It runs well but if I shut...
  2. VTX 1300 Riders Board
    I could use some help. At about 65 at a even speed it seems I'm running out of gas, I switch the petcock and the problem persists. I just had a rejet and a gas regulator from a 55 to a 60. Any ideas what would make it seem like it's running out of gas?
  3. VTX 1300 Riders Board
    I have looked around the forum and have seen for the most part that adding an exhaust without re-jetting is OK but once you add a better air intake then you need to re-jet. The question I have is, are the gains from adding air and exhaust really worth the extra work and price as opposed to just...
  4. VTX 1300 Riders Board
    I just finished installing the Arlen Ness Big Sucker air kit on my 05 vtx1300 and I am planning on getting Cobra Dragsters (but haven't pulled the trigger yet). I have heard great things about Factory Pro's jet kits, and not so great things about Cobra's (Dynojet's) kit. So my plan is to go for...
  5. VTX 1300 Riders Board
    I just got my VTX1300C over the summer, and now that its winter, I've decided to take advantage of my time and do some work. I already did the hole-saw mod a couple weeks after I got the bike. I also just recently ordered an Arlen Ness Big Sucker air kit (because it was a heck of a deal) and it...
  6. General MC Message Board
    Hey everybody I need some help I have put new pipes and a new intake on my 07 vtx 1300c intake is an arlen ness big sucker and the pipes are cobra dragsters I did rejet it with a cobra jet kit it only came with a main jet and not a pilot jet so I dont know if that is what I need to change or not...
  7. VTX 1300 Riders Board
    hello all, any ideas on what to do if pipes running hot after clayton mod? From reading the boards here, I assume an A/F ajdustment or even a re-jet may be needed. help?
1-7 of 7 Results