Honda VTX Forum banner
lights
1-7 of 10 Results
  1. How To, Step-by-Step
    Custom LED Modules: Motorcycle LED Auxiliary Lights I will begin by making clear that these modules can be used for so many different applications – although the principles are the same for just about every application, I will be running through my particular purpose of adding lights to my...
  2. General MC Message Board
    I finally found some time to finish the wiring, mounting, and cutting for my new running lights! Neck covers were painted with my paint match I got from my fender. Cut out two slots in the left cover for the illuminated switches to fit just right. All the wiring was done for the lights so the...
  3. VTX 1300 Riders Board
    Hi all, I can’t thank you all enough for the great wisdom and expertise on this board. ’04 VTX1300S. While I’m waiting until I have 4 months to make up for my mistakes by trying this stuff myself (this winter), I did have some work done base on the posts from all of you. The bike felt like...
  4. VTX 1800 Tech Board
    I am having a problem with signal lights. When I put the signal light on regardless of Right or Left, the lights for that direction just go off rather than blinking. Sometimes after a very long wait they will start to blink but more recently they just stay off. I have replaced the relay switch...
  5. General MC Message Board
    I had my turn signals go out but my running lights stayed on. So I first checked my lights and noticed the center of the lights were getting gray. I got my light to work by cleaning my turn signal switch but does anyone know why my light look like this.
  6. VTX 1800 Tech Board
    Hey team, I have a 1800C (02) and had to install new rear signal lights. All ran well for about a month but I noticed that on the left turn signal, when engaged it would go out and not blink. Sometimes, it would delay for 5 - 10 seconds and then start blinking. Then while driving the other...
  7. VTX 1300 Riders Board
    Trying to replace rear turn signal on 03' vtx 1300 R. I have the service manual and it says to remove rear fender in order to run new light. I'm sure I could splice and solder but for sake of learning to take my bike apart do I need to put the bike on a stand before unscrewing the rear springs...
1-7 of 10 Results
Top