Honda VTX Forum banner

risers

  1. VTX 1800 Tech Board
    Hello guys. Back in 2010 I replaced the risers on my bike (VTX 1800F) and it has been a much better ride since, but it still not as comfortable as I wish. I can't remember where did I get them. as far as I can remember, the reason I didn't get longer ones was because otherwise I would have to...
  2. 1800 Classifieds-For Sale Only
    These 2" high pull back risers come with adapters for the VTX 1800. Uses stock cables, easy install. Risers are $40 + shipping and adapters are $15 + shipping. PM for additional info. These are perfect and I am so confident, that I will ship them to you, and if you are not satisfied with the...
  3. 1300 Classifieds-For Sale Only
    Parting with aluminum risers for VTX1300C. Have two pairs of 3 inch risers and one pair of 2 inch. One pair of 3 inch risers need to be threaded. Some scratches on them that can be easily buffed up to a shine. $35 for the 3 inch threaded $25 for the 2 inch threaded $25 for the 3 inch...
  4. VTX 1800 Tech Board
    I would like to get pull back risers. What height can I go without changing lines and cables? Thanks!
  5. VTX 1300 Riders Board
    Put the Genmar risers on my "c", yesterday. For me, a dramatic improvement over stock. I have a mustang seat with a backrest I couldn't use until now (I'm 5'9) with the stock setup. I sit further back and it made a difference in relation to the MS Batwing and windshield - in a quieter zone, so...
  6. VTX 1300 Riders Board
    Well, so I got my bike last fall, and first off want to say thanks to everyone on the forum. I have found a lot of useful stuff on here. I had a lot of projects go on this winter so I decided to take some pics and put them up.The biggest thing I did was after my clumsiness dropped the tank after...
  7. VTX 1800 Tech Board
    I have rarely had a bad experience implementing an upgrade on my 2006 VTX1800 S. But this one deserves a write-up so I can prevent you from this experience. Recently after replacing my stock (geled but not good enough) seat, I ran into the need to adjust my bars for a better fit. KEWL came out...
  8. 1800 Classifieds-For Sale Only
    Aeromach 6" CNC custom billet aluminum risers for the VTX C and F only. They bolt on easily and accept the stock speedo housing. Stock control cables and wiring will work fine. These risers will bring the stock handlebars 1 1/8" UP and 1 1/2 " BACK. Compare to Cycle Solutions Aeromach PN AM-3409...
  9. VTX 1300 Riders Board
    Can any one tell me the max rise/pull back risers that I can use on my VTX1300 retro while still using stock cables? Thanks,
  10. General MC Message Board
    Ok, so I've been reading a number of posts about people getting new risers to resolve back problems. I put on an Ultimate seat last year, which moved me back an inch or two. I countered with some 2" up/2" back Rivco risers, but that has not been enough. I did a 700 mile ride a couple of weeks...
  11. Wanted or WTB VTX Classifieds
    I had some custom black powder coated 1" dia 13" rise 33" width Z-apes fabbed and I need risers and cables. Ive got an 06 1300c with the stock direct mount drags right now. Either quote me a price on some 1"-3" risers with 1"-1 1/8" mounting section or we can do a trade. Ill be looking to sell...
  12. 1300 Classifieds-For Sale Only
    I had some custom black powder coated 1" Z-apes fabbed and I need risers and cables. Ive got an 06 1300c with the stock direct mount drags right now. Either quote me a price on some 1"-3" risers with 1"-1 1/8" mounting section or we can do a trade. Ill be looking to sell the stock 1300c direct...
  13. 1300 Classifieds-For Sale Only
    Just completed a new build on my bike so I am selling the stuff that I took off and not reusing. To check out my new build check out the post here: http://www.vtxoa.com/forums/showthread.php?t=310924 My bike has alway been garage kept and I take care of it so the parts I am selling are in good...
  14. Wanted or WTB VTX Classifieds
    Im looking for a set of 16 in apes and appopriate cables for my 04 1300c. I'd even be interested in longer cables if anybody has any they no longer need as long as they will accomadate the taller bars. I'd also be interested if anybody has any other ideas as my stocks are just too short for me...
  15. VTX 1300 Riders Board
    I am looking for 4.5" risers for 1300R. There are some for sale on ebay motors for about $50. I have seen others on cycle parts nation for about the same price. I am not sure they will fit. Do any of you know any that would work for a similar price? And will they work with the factory cables...
  16. VTX 1300 Riders Board
    I just ordered a pair of Phatrisers III-X from Scootworks.com. The III-x states they are 2" rise above standard with a 5" pullback. I am only 5'6" and have new Ulitmate X seats w/rider backrest (which are fabulous!). I am wondering if anyone else has a pair of the III-X? I need a fair amount...
  17. VTX 1300 Riders Board
    Hey all, Wisconsinite had a great warm day with no snow or rain so I brought home my new 06 VTX1300S. First thing. I got a 17" Memphis Shade windshield with quick release. It's to short and I'm trying to send it back and get the 19" or something higher. So my first question is there...
  18. VTX 1800 Tech Board
    Ok. Bike got trashed by a cager, no, I wasnt on it..... and I am replacing my pratically new apes. I was looking at these. My question is threefold. 1) I realize the ends are tapered for the grips, but do the stock Controls mount to bars that are this thick w/o modification or is it tapered for...
Top