Honda VTX Forum banner

turn signals

  1. Turn Signals not working

    VTX 1300 Riders Board
    '05 1300R Turn signal switch doesn't work consistently. Sometimes it will initiate the signals to come on, sometimes not. The switch feels very spongy. When the bike is at speed they seem to work more consistently. Seems like when engine revs it raises the voltage and sends the signal...
  2. 2 wire LED Turn Signal Wiring Diagram

    VTX 1300 Riders Board
    I used 270Ω resistors and 3W Diodes
  3. Turn Signal Mirrors

    General MC Message Board
    Have any of you use used turn signal mirrors? How do you like them? What brand did you purchase?
  4. intermittant no turn signals

    VTX 1800 Tech Board
    I am having trouble with both signals not working sometimes. Turning on or signaling, nothing happens then poof the signal starts flashing. happens with both. What to do
  5. Anyone tried this - turnsignal

    VTX 1300 Riders Board
    Just wondering if anyone has tried or if it would be possible to 'tap' off the front turn signal wires themselves and put an led on the bars to let you know your turn signal is still on. I see the beepers and all but wondered about this. Never said it was a good idea, but an idea.
  6. Sale: 1300 C exhaust, turn signals, air cleaner, shocks

    1300 Classifieds-For Sale Only
    After swapping out some of the stock stuff on my 06 1300c, ive got a few choice items for sale. All the stuff is like new. Pics and prices upon request Stock: pipes, airbox, shocks, rear turn signals Prices negotiable so lets deal. :thumbup:
  7. HELP!!! Signal light Wiring

    VTX 1800 Tech Board
    Hey team, I have a 1800C (02) and had to install new rear signal lights. All ran well for about a month but I noticed that on the left turn signal, when engaged it would go out and not blink. Sometimes, it would delay for 5 - 10 seconds and then start blinking. Then while driving the other...
  8. problems with my running lights.....

    VTX 1800 Tech Board
    2003 VTX1800C....... three of my four running lights are working.. the left rear is out. but when i turn the turn signal on it works... the relay clicks loud when it does. is it the relay? i changed the bulbs, checked the fuses and rechecked all the connections:dontknow:... brake light works...
  9. Removed front signals, question on what's left?

    VTX 1800 Tech Board
    I am going all LED and removed all stock turn signals. What is left is in the pic. There is a thread on here about removing the chrome fork covers, is that what is above the vacant turn signal space? I was confused because the lower chrome covers on the fork have a Showa sticker on them, wasn't...
  10. Rear Turn Signal relocation ?

    VTX 1800 Tech Board
    Does anyone know of instructions on how to do it easily ? Wiring especially. Thanks !! :tools:
  11. My Undertaker brake light idea

    VTX 1300 Riders Board
    So I finally found something that I really like the looks of for my new undertaker fender. Only thing is, I have no idea how to do it nor do I have the tools to do it. Has anybody done this before? I'm not sure how these were done (below), it appears they are perfectly flush and clear coated...
Top