Honda VTX Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
32 Posts
Discussion Starter #1
If you have a C and like the drag bars but not the reach, check out my exchange with Phat Performance Parts. My only question now is how long the replacement cables and brake hose need to be. FYI, the link is to Parts Unlimited.
[HR][/HR]

"This is what the manufacturer specs. I'm pretty sure it's installed on
the bike measurement and to the end of the bars. Have you heard
something different? T


You can see the catalog specs here


http://asset.lemansnet.com/static/sites/partsunlimited/flipper/2014_Street/#?page=490






-----Original Message-----
From: Jeff
Sent: Tuesday, July 15, 2014 9:14 PM
To: Sales - Phat Performance Parts
Subject: RE: Drag Specialties 1.5 Inch Handlebar Super Radius 8 Inch
Rise - VTX


Hi. Is there really a 15 inch pull back with these bars? I am
considering them for a Honda VTX 1300C and need the pullback. Thanks
for your help.


Jeff
 

·
Registered
Joined
·
279 Posts
I put R bars on my C and if I figured right they were 12 inch pull back - to much pull back for me - I went with a HD bar with 9 inch pull back and like it much better - I 6ft with 30 inch inseam
 

·
Registered
Joined
·
32 Posts
Discussion Starter #3
I put R bars on my C and if I figured right they were 12 inch pull back - to much pull back for me - I went with a HD bar with 9 inch pull back and like it much better - I 6ft with 30 inch inseam
Good to know. 15 seems extreme. I might be better with 12 or so.
 
1 - 4 of 4 Posts
Top