Honda VTX Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
45 Posts
Do you think I should go back to the #55 slow jet?
Do you think I should put washers back on factory needle in the slide valve, per the Scar mod instructions?
Putting the shims back under the needle will make it richer from 1/4- 3/4 throttle.
The needle you received with the clips eliminate the need for shims, as you use the clip to raise and lower the needle in the main to change midrange jetting.
If you are rich, and have eliminated all other possibilities, such as ignition, or fuel level, then to lean it out in the mid-range you need to lower the needle in the main.
 
1 - 1 of 1 Posts
Top