Honda VTX Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
948 Posts
Discussion Starter · #1 ·
can irrideum plugs be cleaned, iplan on checking them tommorrow,and if i remember the torque for resetting them is 13 ft lbs.
 

·
Registered
Joined
·
948 Posts
Discussion Starter · #10 ·
plugs

pulled them today they were a little black on the ring part of the blug but pretty much the golden brown on the elctrode,so i just used an alcokol based cleaner and a soft brush,fired her up runs the same (fine) but at least i know the plugs and fuel & air mix is good,i don't think i would recomend using a stiff brush like some of the guys mentioned,but thanks like always for the input
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top