Honda VTX Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
916 Posts
Discussion Starter #1
I have the bars on but both side have the electrical wires stretched fairly tight. I have seen in pictures on Tappers? bike in the instructions and on ICOPUS that these are routed normally along the bars. Before I take the headlight apart to find some missing slack (not in the directions) can someone tell me what I missed?
 

·
Registered
Joined
·
1,038 Posts
sounds like you found the answer, He, Tapper may have spliced some extra wire into his harness :!: :!:


Be Safe
 

·
Registered
Joined
·
916 Posts
Discussion Starter #3
Thanks RoadCapt. I will hafta crack open the headlight to see if I can get any more "wiggle" room.

Splicing the wires eh? That sounds like a whole 'nother project.

I don't 'spose anyone knows if the master cylinders on the Retro models are at different angles than the C...anybody?
 

·
Registered
Joined
·
2,418 Posts
You can usually get a little slack out of the headlight bucket. I wanted more, so later on, I just spliced a couple of inches of wire into that harness.
 

·
Registered
Joined
·
38 Posts
My wires are kinda tight, but they work. I plan on splicing in some length when I get a chance. More for cosmetics than anything else.
 
1 - 5 of 5 Posts
Top