Honda VTX Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
759 Posts
Discussion Starter #1
I forgot where, but somone had asked about what tach to put on their C model. Here is a picture of the Cobra tach made for the 1300C. It is way different from the tach on their website, and much cleaner looking in my opinion.

George

 

·
Registered
Joined
·
78 Posts
Thanks, i was wondering about that, the stock pic didn't make much sense.

How does the back look, finished, unfinished, wiring?
 

·
Registered
Joined
·
198 Posts
Nice, but how is the needle? I have read about certain tachs with severe needle bounce. Is the Cobra like that?

nh3
 

·
Registered
Joined
·
759 Posts
Discussion Starter #4
The back of the gauge is polished with a very nice finish and the wires come out all together in a rubber sleeve. The only problem I found was the seleeve was a little short for my liking and so I added a piece of heat shrink tube over it to make the wires a little more sanitary.

As to the needle, I have not noticed any bounce in it at all. I have looked at some of the cehaper tachs and they didn't apperar to be made as well, but maybe they were. I would definately recommend the Cobra for anyone with a C model.

George
 
1 - 4 of 4 Posts
Top