[toXic]

My friend Jay is out in VA with a faulty Power Commander. The mechanic told him to just disconnect it and let the ECU re-establish itself. He and I have no idea how to SIMPLY disconnect the PC3 - any help will be appreciated - call me at 402 880 7875 if you have advice and instructions.

 

[fozzir]

It's EZ

Just disconnect the power from the right side cover (brown wire).
Then go under the seat and remove the black connector from the ECU.
Disconnect the stock black connector from PC3
Connect the stock black connector you removed from PC3 and plug into ECU.

That's it.

 

[JD9613]

There is a ground and tap to the wiring harness to remove also. be careful with those small wires.

 

[toXic]

Thanks!