Honda VTX Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1,095 Posts
Discussion Starter #1
The easy way and the hard way (my apologies Hardway). The easy way is to use the procedure on Bare's web site:

www.bareasschoppers.com

I am usually the type who does things the hard way. Just get down on the floor and do it. But for once, I thought I would do a little advance preparation and see what happened. So I built the 2x6 platforms and laid out all of my tools and supplies in advance, as Bare and David recommend. To my delight, the extra four inches of working space and advance prep made the job much easier - almost a pleasure.

Once again, thanks to all of the hierophants on this forum who share their expertise and knowledge.
 

·
Registered
Joined
·
306 Posts
last yr thats just how i did it [got down on the floor and did it] the oil change came out great but i had a big burn mark on my cheek from the hot pipes for a couple of weeks,outch.one look in the mirror when the job was done and before the day was up i had the sears jack [never again]
 
1 - 2 of 2 Posts
Top