Looking for stock jets and needle... 😐

349 Views 7 Replies 4 Participants Last post by fancythinkinbox, 12 d ago

fancythinkinbox

Discussion Starter · 1 mo ago

Hey all.. I upgraded to a 06 1300r a few weeks ago and someone put in a jet kit.. it has a stock air cleaner and Vance and Hines pipes.. I've cleaned and adjusted the carb multiple times but still can't get it 100 percent..

I was curious if anyone has the stock jets and needle I could buy from them or what sizes the stock are and a decent rebuild kit with all the parts..

Thanks again..

Save

1 - 8 of 8 Posts

Chicago-Spike

· #2 · 1 mo ago

Almost everything you could think of is on the How To;Step-by-Step board and under the 1300 Section is this thread;

1300 Carburator: Scar Mod, A/F Mix&Idle Adj, Fuel...

deleted…post was blacked out for some reason…..good luck

www.vtxoa.com

Save

Reactions: 1

brettp

· #3 · 1 mo ago

And probably plenty of posts over the years with that set up who shared their results with rejetting. When I had my 1300, a stock air box with aftermarket baffled pipes needed to be rejected. Stock jets made it pop like hell.

Save

Reactions: 1

Hans&Feet

· #4 · 29 d ago

Keihin carb is OEM
Stock jets Low speed #55, Main jet #195
I have stock air box, straight pipes with a baffle, never re-jetted.
Allballsracing has a carb kit. I do not know much about it.
Cobra jet numbering is different from the Keihin.

https://www.partzilla.com/catalog/honda/motorcycle/2006/vtx1300r-a

The parts on your VTX.

Save

brettp

· #5 · 29 d ago

Hans&Feet said:
Keihin carb is OEM
Stock jets Low speed #55, Main jet #195
I have stock air box, straight pipes with a baffle, never re-jetted.
Allballsracing has a carb kit. I do not know much about it.
Cobra jet numbering is different from the Keihin.

https://www.partzilla.com/catalog/honda/motorcycle/2006/vtx1300r-a
The parts on your VTX.

Hans, did you delete the PAIR on your 1300?

Save

Hans&Feet

· #6 · 29 d ago

I did. Dec 2005

Save

Reactions: 1

brettp

· #7 · 29 d ago

Hans&Feet said:
I did. Dec 2005

I never did. Might very well have been the reason for my popping

Save

fancythinkinbox

Discussion Starter · #8 · 12 d ago

thanks for the reply.. I wound up getting Honda OEM needle and jets.. Installed them today and OMG night and day difference in how it's runs.. it runs perfect now..

Save

Reactions: 3

1 - 8 of 8 Posts

Top Contributors this Month