New clutch question

159 Views 3 Replies 3 Participants Last post by Sojourner, 11 d ago

MoFo

Discussion Starter · 11 d ago

just put in a MTC clutch, springs and steels everything was fine on the first ride, front wheel would come off the ground hitting 2 and 3. Road about an hour all is fine. Stopped to get gas and when I started riding it was slipping. About 5-10 minutes in the ride home all was well again. Any ideas on what I should do???

thanks

Nash

Save

1 - 4 of 4 Posts

Hans&Feet

· #2 · 11 d ago

Have you bled the clutch hydraulic system. Sometimes some crap may move and cause issues.

Save

Reactions: 2

MoFo

Discussion Starter · #3 · 11 d ago

Hans&Feet said:
Have you bled the clutch hydraulic system. Sometimes some crap may move and cause issues.

yes. I’m going to do it again in the morning what’s gets me is it’s working fine now
Thanks
Nash

Save

Sojourner

· #4 · 11 d ago

I would guess the master cylinder has some debris in and around the fluid return port which will keep pressure on the slave and not allow the pressure plate to return to a full on position. Of course there's other possibilities too but that's where I would start.

Save

Reactions: 2

1 - 4 of 4 Posts

Top Contributors this Month