[MR VTX]

It's amazing they found one at a bike wreckers. Imo the pipe looks stock to me. It looks about the same length as a stock 1800c pipe with a stock tip. The extra sound may come from an altered baffle. Nice bike! I love the paint scheme

Sent from my SM-N950U using Tapatalk

It could also be a shortened, modified muffler from www.vtxexhaust.com.

Here's the 1800C stock length (goes past the rear wheel).

 

[jesus freek]

True that!

Sent from my SM-N950U using Tapatalk

 

[Tankslapper]

It's amazing they found one at a bike wreckers. Imo the pipe looks stock to me. It looks about the same length as a stock 1800c pipe with a stock tip. The extra sound may come from an altered baffle. Nice bike! I love the paint scheme

Sent from my SM-N950U using Tapatalk

I reckon your on the money mate. I had an original here a friend gave me & I threw in the back of the shed. Just dug it out & they are the same pipe except the one on my bike is shortened & appears to have a baffle mod from looking up it.

 

[jesus freek]

I reckon your on the money mate. I had an original here a friend gave me & I threw in the back of the shed. Just dug it out & they are the same pipe except the one on my bike is shortened & appears to have a baffle mod from looking up it.

Very Cool! Enjoy the X...she's a beaut!

Sent from my SM-N950U using Tapatalk

 

[Snakebite]

One of the Texas X Riders in our Houston group had one on his 1800...one of the best sounding exhausts for the 1800. Hang on to it, 'cause RH has been out of business for over a decade now.

I have one on my '02 as I said and it's been on it since '04. I also have a brand new one I've never used because when the first one was delivered it had a very small dent on it. It is where you wouldn't be able to see it after installation, but I pitched a fit and they sent me another one free of charge and didn't want the first one back. I wiped the dented one down with lubricant and wrapped it in cheese cloth to preserve it just in case I messed up the one I installed. It's still in my shop.

 

[Snakebite]

Cheers, I bought the bike from a shop & the bike was traded with an ugly loud pipe (their words) that would not pass a road worthy certificate so the shop bought this pipe at a bike wreckers & put it on. I’d always wondered

Easy way to tell is the stock pipe reaches to a little past the back of the tire. The shorty only reaches the back of the brake rotor maybe a quarter to half inch past it. I don't know the exact measurement, but approximately 4 to 5 inches or more shorter than stock.

 

[KenTennGuy]

• Fresh paint
• Fury pipes mounted
• License plate moved to side mount
• Embedded flush LED rear turn signals
• Gray twilight lens with LED brake and turn signals

 

[Gman-1800N]

2006 1800n now have vance & hines, k&n filter, and de smog. Ready for the next upgrades ; )

 

[KenTennGuy]

Mods after purchasing used in July, 2021:
1) Removed windshield, forward pegs, rear pegs, rear seat, bags and mounting hardware, rear signals, tag mount, grips, front signal lenses, torn seat, stock pipes.
2) Relocated tag mount to side.
3) Eliminated rear signal stalks, replaced tail light with unit that had integrated turn signals.
4) Embedded LED turn signals in rear fender.
5) Replaced stock front signal lenses with gray lenses, replaced stock bulbs with LED amber bulbs.
6) Installed Honda Fury pipes with minor fabrication.
7) Painted black bike with Porsche Cream White.
8) Installed Van's grips.
9) Purchased new tires.
10) Replaced stock seat with another stock seat in perfect condition.
11) Mounted vintage tank badges on side covers.
12) Removed plug covers. Shown before cleaning.

Upcoming mods:
1) Replace stock spark plug wires with red or red plaid.
2) Replace front brake line with stainless steel line.

 

[Gman-1800N]

 

[MedicDrewTN]

 

[cubcake1]

OK guys i am sure there is already one of these on this here but i want pics of your VTX. and a list of what you did to it HP numbers if you have them and so on i just got a new 1800c and it is my first "cruiser" i was all sport bikes until now and want to see what people are coming up with to do to these bad ass bikes

2006 VTX1800N3, Mostly stock except for a new LED headlight and Saddlebags. Replacing any and all blemished/tired looking

areas with rust or discoloration. Replaced radiator screen, put OEM grips back on, fixed any vibration issues with rubber washers etc. Working on making her look like she rolled off the showroom floor.

 

[SSHardball22]

Im a little late to this party, but here ya go. 2002 1800R

 

[Everett Locke]

OK guys i am sure there is already one of these on this here but i want pics of your VTX. and a list of what you did to it HP numbers if you have them and so on i just got a new 1800c and it is my first "cruiser" i was all sport bikes until now and want to see what people are coming up with to do to these bad ass bikes
I bought it just like this about 5 days ago. It's an 09 with 12,000 miles. This bike is gonna be fun. It's actually big enough that a bagger kit doesn't look goofy. I'm looking for performance mods right now. What's the best carb for these things?

 

[Sinbad]

OK guys i am sure there is already one of these on this here but i want pics of your VTX. and a list of what you did to it HP numbers if you have them and so on i just got a new 1800c and it is my first "cruiser" i was all sport bikes until now and want to see what people are coming up with to do to these bad ass bikes

This is Eve! Purchased last year on New Years Eve, hence her name. I love her just the way she is, no modifications. None necessary.

 

[Merry Prankster]

This is Eve! Purchased last year on New Years Eve, hence her name. I love her just the way she is, no modifications. None necessary.
View attachment 213053

HELLO EVE!

 

[69camaro]

So I bought a 1800N back in July which on Dec 23 was called totaled by the insurance company so I picked up this 2006 1800S shortly after I am not a fan of the spoked wheels so I swapped the wheels before the insurance came for the old bike.

 

[Justa_Poser]

 

[Motorhommie]

OK guys i am sure there is already one of these on this here but i want pics of your VTX. and a list of what you did to it HP numbers if you have them and so on i just got a new 1800c and it is my first "cruiser" i was all sport bikes until now and want to see what people are coming up with to do to these bad ass bikes

basic 2006 VTX 1800N. All I have done is with my fellow VTX buddy XBeast was to put a K&N air filter on, put some spacers on the cover to allow more air into it. Runs great.

 

[brettp]

View attachment 213253
View attachment 213254

I like that blue!