Honda VTX Forum banner
1 - 1 of 1 Posts

· Registered
4 Posts
I'm also looking to experiment a little with power commander vs. no power commander. To disable the PC can I just disconnect the power and leave the unit plugged inline of the stock connector and the ECU or do I need to unplug the PC from the ECU? In other words, if I cut the power to the PC, will the stock connector still "run through" the PC wiring to the ECU?

Thanks in advance for info.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.