Honda VTX Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
295 Posts
Discussion Starter #1
Has anyone came up with a saddlebag mounting system that doesn't stick out like Easy or Ghost brackets? I would like a closer to the fender look.
 

·
Registered
Joined
·
44 Posts
go to lowe's or any hardware store and get a piece of 1''x 3' long piece of steel,mark and drill holes thru it and saddle bags ,only puts bags out 1/4''
 

·
Registered
Joined
·
799 Posts
Bags

I used aluminum stock 1/8 inch by 1" inside the bag and behind it. Drill holes and bolt on. With the brake caliper on one side and the final drive on the other, it's pretty hard for the bag to get to the wheel.
 
1 - 4 of 4 Posts
Top