Honda VTX Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
63 Posts
Discussion Starter #1
I was alerted by a passing motorist (thank heaven for biker friendly chicks:twisted:) that my taillight/brake light was out. I made my way to the local parts house and after considerable work was able (with the loan of a de-locking spray and opening a screwdriver set to lend me a smaller one:tools:) to loosen the 2 screws holding the taillight cover to the rear fender of my 1300C (man they must used an air wrench to install them). I brought the bulb to the clerk who found the replacement. In went the bulb, the taillight lit Ok but the brake light only works when I depress the foot pedal:shock:. Am I right in assuming that the problem is in the brake handle switch?
Thanks in advance to all responders.:dontknow:
Rothar
 

·
Registered
Joined
·
1,577 Posts
Sounds like that's the problem. Unplug the wires at the switch and jumper across them, if it lights that's it.
 
1 - 2 of 2 Posts
Top